anko 42949244 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Redner anko 42949244 herunter. anko 42949244 6 Seiten. Bluetooth party speaker

Seite drucken

DESCRIPTION OF REMOTE CONTROL

To insert the remote control batteries:

1.Open the battery compartment.

2.Insert 2 x AAA batteries with correct polarity (+/-) as indicated.

The 2xAAA battery not include in our products.

3.Close the battery compartment.

CAUTION:

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

1. Power on/off

2. Mode

3. Mute

4. Volume+

5. Previous Track/CH-

6. Scan

7. 0-9 keys

8. EQ Function

9. Play/Pause

10. Next Track/CH+

11. Volume -

12. Repeat

Getting Started

Connecting Power Cable

Warning:Ensure the AC/Charge switch is in OFF position before plugin.Plugin the AC

connector into the 220-240V 50Hz inlet socket in the rear panel of the unit and the

other end into the standard AC 240V wall socket.

1. Do not plug or unplug the power cable while you have wet hands.

2. To protect this apparatus from alightning storm, or when left unattended and unused for

long periods of time, unplug power cable from the wall outlet.

3. When unplugging the power cord from a wall outlet, always pull on the power plug only.

Never unplug it by pulling the power cord.

Charging the internal Battery

The speaker comes with a built-in rechargeable battery, follow the below steps

to charge it:

AC INPUT(220-240V) Charging

1. Please connect the power cable on the rear panel and plugin to the 220-240V 50Hz wall

socket to charge the speaker.

2.When start charging, the RED LED indicator will light on.

3.When almost full charging, the RED LED indicator will keep ﬂashing.

4.When full charge, the RED LED indicator light will light off.

DC 12V IN Charging

Connect the DC cable of the external power supply to the DC 12V IN terminals of the

speaker rear panel, please corresponding connect to the Red (+) and Black (-) indicated.

Noted: This DC input not for the battery charging, only supply the power to work for the

speaker.

Note:

please fully charge the product when it is not going to be used for a long time and

charge once a month to keep longer battery life.

Turning ON/OFF the speaker

1.Press Power ON/OFF button on the rear panel to turn on or off the speaker.

2.Use the remote control to turn it into Standby mode, press it again to power it on.

Intrenal Battery Level indicator

1.There are three grids battery indicator symbol keeping static on the right bottom corner of

the display screen, meaning battery capacity is full.

2.As the battery capacity less, the battery indicator symbol will become as two grids.

3.When the rest one grid battery indicator and keeping ﬂashing,meaning the battery

capacity is almost running out, please charge the battery on time, otherwise the speaker

will turn off.

Note: There is the low battery warning sound "DI DI" per 10 seconds when the battery

capacity run out as above 3.