anko BL1703A-SA Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blender anko BL1703A-SA herunter. anko BL1703A-SA 9 Seiten.

2. Blades are very sharp. Handle with care.

3. Do not operate without the jar cover in place.

4. Do not attempt to disassemble the power base.

5. Cleaning and user maintenance should not be made by children without competent adult

supervision.

IMPORTANT!

vegetables, ensure that the speed selector is set at highest speed. If the speed

used is too low, the motor will be damaged due to insufficient torque. When the

motor speed is found to be too slow, you must immediately use a higher speed

setting to blend or turn the speed selector to "OFF" to stop blending!

CLEANING AND MAINTENANCE

Make sure to disconnect appliance from mains power before cleaning.

For the blender

The Auto Clean function can clean the blender easily and rapidly in complete safety.

1. Pour a little warm soapy water into the Jar and turn the Speed Selector to "1" position

and press down the Pulse button without releasing it for a few seconds.

2. Dismantle all detachable parts

running water. Detach the blade assembly from the jar assembly, take the blade

assembly out, and finally remove the jar base seal ring. In addition, detach the

measuring cup from the jar cover. Rinse the jar, blade, jar base, jar cover, seal ring and

measuring cup under running water. (

3. Wipe the outer surface of motor unit and with a damp cloth.

IMPORTANT! Do not use abrasive cleanser and never immerse motor unit in water

for cleaning

When blending maximum level load or hard fruits and

Dissemble the Jar from the motor unit and rinse it under

See Fig.8）

Fig.8