anko WBL-005 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blender anko WBL-005 herunter. anko WBL-005 10 Seiten.

TROUBLESHOOTING

PROBLEMS

Motor doesn't start or attachment

doesn't rotate.

Food is unevenly chopped.

Food is too finely chopped or too

watery

Cannot achieve crushed/soft ice

from ice cubes.

Cup is leaking

Unit doesn't turn ON

Unit doesn't turn OFF

Doesn't mix well

Blade assembly will not properly

align to the cup

POSSIBLE REASONS & SOLUTIONS

For the cup, make sure that the tabs are seated in the slots and

turned clockwise.

You are chopping too much food at one time, or you are not

pulsing properly. Reduce the amount of food in the cup.

The food has been over processed. Use short operating time for

best results.

For best result use ice straight from the freezer. Try using short

operating time instead of a longer time.

Make sure the cup is completely dry before adding ice.

Make sure that your blade assembly is properly assembled to

the cup. Leaking may occur if it is misaligned when twisted

onto the cup. Turn the blade assembly tightly clockwise.

Make sure the unit is plugged in.

Make sure the blade assembly is properly assembled to the cup

and that is not misaligned.

Unplug the power cord from the electrical outlet.

Pulse ingredients for best results. Press down on the cup in

short intervals for even blending and chopping. For frozen

ingredients, pulse in short intervals of 2-5 seconds and repeat.

Set the cup on a level surface. Place the blade assembly on top

of the cup and align the threads so that the blade sit flat on the

cup. Twist clockwise so that the blade is aligned to the cup

until you have a tight seal.