ANLIDAR MyTorq MY8-EP0103P Handbuch für Betrieb und Wartung - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Kraftschraubendreher ANLIDAR MyTorq MY8-EP0103P herunter. ANLIDAR MyTorq MY8-EP0103P 13 Seiten. Dc-type automatic non-carbon-brush with counter series

Seite drucken
Maintenance and Inspection:
1. The screw driver must be operated in top condition, one day working hour must be not more than eight hours.
cording to operating frequency and torque loaded, we suggest adding lubricating oils in clutch per 3-6 months,
and kindly contact with distributor when product's maintenance .
2. Please note don't let the motor get over heated, every minute use 10~15 screws to operate.
3. The frequency use of this electric screwdriver is over than eight hours a day, still it needs periodically testing and treatment.
Every 5-6 months.
4. Inspect tool cords periodically and if damaged, have them repaired by an authorized service facility. Inspect extension cords
periodically and replace if damaged.
5. Do not remove any labels. Replace any damaged label.
1.
The use of other than genuine MYTORQ replacement parts may result in decreased
tool performance and increased maintenance and may invalidate all warranties.
2.
All repairs and maintenance of this tool and its word must be performed by an authorized service center.
3.
Anlidar is not responsible for customer modification of tools for applications on which Anlidar was not consulted.
4.
Repairs should be made only by authorized, trained personnel. Consult your nearest MYTORQ authorized service center.
5.
It is the responsibility of the employer to place the information in this manual into the hands of the operator.
Servicing
CAUTION
DO NOT ATTEMPT TO REPAIR THIS
ELECTRIC SCREWDRIVER
CAUTION
SAVE THESE INSTRUCTIONS
DO NOT DESTROY
6