Becos TS8-MS Overdrive Midi Switching Schnellstart-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Schalter Becos TS8-MS Overdrive Midi Switching herunter. Becos TS8-MS Overdrive Midi Switching 6 Seiten. Analog overdrive with external relay switching and midi functions
Auch für Becos TS8-MS Overdrive Midi Switching: Schnelles Einrichten (4 seiten)

Seite drucken

Example 2 - Control pedal Bypass and an amplifier's Channel / Feature switching

using Control Change MIDI commands

For this example we will edit a midi preset on the same MidiMate controller to control TS8-MS

Overdrive from within this preset. We will use Button 5 to control overdrive pedal (there are five

buttons available in Controller Mode that can be configured as on/off switches within a preset). The

state of these buttons can be saved within any midi preset. We can choose a Control Change number

from Table 3 and asign this button to switch on/off one or more relays in the TS8-MS pedal,

according to our needs. For this example, we will only control pedal Bypass so we will use control

change number 80.

Of course, any other of the five available buttons can be assigned with a different CC number, and its

state can also be saved within this (or other) preset. However, you may have other midi devices

where you would want parameters to be controlled by these on/off switches, so you have to think and

organize your gear to serve them all.

1. Connect TS8-MS pedal in your audio rig;

2. Connect midi output of the midi controller (or output/through of another midi device in your

rig, if you have more midi devices) to midi input on the overdrive pedal;

3. Use the rotary switch inside TS8-MS Overdrive pedal to set midi receive channel = 2;

4. Put the midi controller in Controller mode;

5. Choose preset MIDI 1 on the midi controller and and press 2ND button to edit this preset:

a) scroll to MIDI CHANNELS submenu and set midi transmit channel of S2CH = 2;

this is the same midi channel number programmed in TS8-MS; you can set the other

remaining SETS to control other midi devices on different channels; this setting is

global on MidiMate controller, which means you only have to set it once;

b) continue to scroll to PROGRAMABLE PATCH CHANGES submenu and set

program change number of SET2 = 100; when this program change number is

transmitted over midi channel 2, the TS8-MS Overdrive will be Bypassed; we will

use this neutral state of the pedal because we will use the on/off CC button to switch

pedal on and off within this preset; this setting is not mandatory but it might be

useful to combine Program Change and Control Change commands;

c) continue to scroll to CONTROLLER ASIGNMENT and set control change number

for button BTN5 = 80; controller asignment settings are global in MidiMate, so this

button will be used to switch overdrive pedal on and off from all midi presets;

d) press 2ND button again to save and exit edit mode;

When loading preset MIDI 1 in Controller mode and pressing Button 5 (the first in the upper raw of

buttons) repeatedly, you will switch TS8-MS Overdrive pedal on and off. If you want to have the

state of the button on, corresponding to overdrive pedal being on, you have to:

1. press Button 5 to ON (LED will lit);

2. press 2ND button to edit MIDI 1 preset;

3. press STORE button (STORED will be displayed momentarely);

That's it. Now, when you select preset MIDI 1, Button 5 will be on and the TS8-MS overdrive pedal

will be also on. While this preset is loaded, you can use Button 5 to switch pedal on and off, but

Disclaimer: Technical knowledge is required for installation of electric devices, electronic circuits and parts. You, the buyer or user, are the only person in charge for solving electrical,

mechanical or other technical problems that may arise during installation or usage of our products. We assume no responsibility for the way you use the purchased product and we will

not be liable for any loss and destruction of any kind, including but not limited to loss of profit or other damages occurring in relation to implementation and usage of purchased product.

You are, as a buyer and/or user, the sole person responsible for the risks involved by installation and usage of the purchased product and we are not liable if you're breaking an

instrument, an amplifier, or other electric or electronic equipment, or properties, or if you hurt yourself or others in the process. All brand names mentioned onour webpages and in the

documentation provided with or for the products we fabricate and sell are property and registered trademarks of their owners. We are not affiliated with neither of them. Media files,

documents and information provided throughout our website is property of BECOS, published under copyright and protected by law.