3M Clean-Trace Luminometer LX25 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte 3M Clean-Trace Luminometer LX25 herunter. 3M Clean-Trace Luminometer LX25 16 Seiten.
Seite drucken
!
WARNING
• To reduce the risks associated with fire and explosion:
− Do not incinerate or dispose of battery or
3M Clean-Trace Luminometer LX25 in fire .
− Do not use or store the Clean-Trace
Luminometer LX25 or power supply in potentially
flammable or explosive environments . The Clean-Trace
Luminometer LX25 system is not designed or
categorized as "Intrinsically Safe . "
− Do not use or place the Clean-Trace
Luminometer LX25 on wet surfaces .
• To reduce the risks associated with hazardous voltage
and fire:
− Do not modify any part of the Clean-Trace
Luminometer LX25 and power supply .
− Keep power supply visible and accessible at all times .
The plug connected to the outlet is used to disconnect
the Clean-Trace Luminometer LX25 from the main
power supply .
− Do not use any power supply cord or USB cord (power
supply cord) other than those specified by 3M .
− Do not allow the power supply to get wet .
• To reduce the risks associated with hazardous voltage:
− Disconnect the Clean-Trace Luminometer LX25 from
the outlet or the computer before cleaning .
− Do not modify or service the Clean-Trace
Luminometer LX25 or power supply . Only 3M
authorized service personnel should provide service
or repair .
− Do not use the Clean-Trace Luminometer LX25 or
power supply if the enclosure is broken .
− Do not use a damaged power supply or damaged power
supply cord .
− Replace damaged components with 3M designated
replacement parts only .
• To reduce the risks associated with illness or infection:
− Do not use the Clean-Trace Luminometer LX25 and 3M
Clean-Trace ATP Tests in the diagnosis of conditions in
humans or animals .
− Do not use the Clean-Trace Luminometer LX25 and 3M
Clean-Trace ATP Tests as an indication of disinfection or
sterilization of surfaces or devices .
!
CAUTION
• To reduce the risks associated with exposure
to chemicals:
− Always wear protective apparel while using
these products .
• To reduce the risks associated with cross contamination:
− Always perform decontamination procedures as
documented in the Clean-Trace Luminometer LX25
User Manual after each use .
− Do not use the 3M Clean-Trace Luminometer LX25 with
ATP tests manufactured by companies other than 3M .
− Always perform ATP Tests within temperature use range
of 15-25OC . Performing tests outside of temperature
use range can result in false negative readings .
− Ensure annual recommended service and calibration of
the 3M Clean-Trace Luminometer LX25 is completed
through the 3M Service Center or 3M authorized
service personnel .
• To reduce the risks associated with sharp objects and
property damage:
− Dropping of or impact to the Clean-Trace
Luminometer LX25 may result in damage to the device
or introduction of particulate into sensitive areas of
the instrument .
• To reduce the risks associated with
environmental contamination:
− Always follow applicable regulations and facility
policies when disposing of the Clean-Trace
Luminometer LX25, power supply, and battery .
3