3M CTM082 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte 3M CTM082 herunter. 3M CTM082 16 Seiten. Event indicator

General

Power

ESD Pro uses a 9V alkaline battery. Do not use any other type of battery.

™

If you are not using your 3M

remove the battery from the unit in order to prevent damage caused by battery

leakage. Note: Not all batteries labeled similarly have the same performance.

Often an off-brand alkaline battery has only 50% to 60% of the capacity of

the leading brand-name battery.

Installing the Battery

Slide off the battery door at the back of 3M

battery to the battery clips. Observe the polarity of the battery. Re-install the

battery door.

Low-Battery Indicator

When battery voltage gets low (less than ~20% capacity remains), the low

battery indicator on the display appears. At this point it is a good idea to

install a new battery to assure optimal performance.

Turning 3M

™

Move the actuator of the power slide switch to the right. The ESD event

counter should display a number of captured events, usually "0" at this point.

The events counter is reset when the power is turned off.

To turn the power off, move the actuator of power slide switch to the left. The

ESD Pro has no automatic shut-off. Don't forget to turn it off when not

™

in active use.

ESD Pro for an extended period of time,

™

ESD Pro On and Off

ESD Pro and attach the 9V

™