3M CTM082 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte 3M CTM082 herunter. 3M CTM082 16 Seiten. Event indicator

Threshold setting in the 3M

events of the strength equal or above the level of importance to you.

Threshold setting is done by a small rotary/push switch on the right side of

the 3M

ESD Pro.

™

Checking the Current Threshold

Simply push the actuator of the switch inwards. One red LED will show the

current ESD event threshold. Any event equal to or exceeding this level will

produce a count and a beep, and the LED bar graph will show it in red. An

event below this level will still be shown on the bar graph in green, but no

count or sound will be produced.

Setting the Threshold

To set a new threshold, do not press the switch. Rather, move its actuator

up or down. Once the switch begins to move, one red LED appears on the

bar graph display. As the switch moves up and down, this red LED moves

accordingly and its position indicates the new theshold level.

Saving the Threshold Level

After the new threshold is set, release the switch actuator and then press it

inwards. The new current threshold is now saved. The next time you power up

your 3M

ESD Pro, this level will be automatically set.

™

ESD Pro is critical in identifying only ESD

™