Drummond Nanoject II Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kontrolleinheit Drummond Nanoject II herunter. Drummond Nanoject II 12 Seiten. Digital control box

Seite drucken

[

MANUAL

] Mode

This mode will enable the user to

manually fill and empty the micropipet.

Pressing the [FILL] icon will retract the

wire plunger, while pressing the [EMPTY]

icon will cause the wire plunger to extend.

If the [FILL] or [EMPTY] icon has been

pressed and you desire to stop the action,

simply press the same icon position (now

labeled [STOP]) a second time.

Note: [EXIT] icon is disabled while the

wire plunger is in motion.

Note: The speed of the fill can be

regulated in the [SETUP] mode and is

independent of the injection rate.

[EMPTY] has only one speed

(92 nL per second).

Press the [EXIT] icon to exit back to

the operational mode screen.

[

INJECT

] Mode

This mode is used to do single manual

injections. It enables the user to program

an injection volume from the displayed

volumes. Press the [INJECT] icon to

inject the desired volume at the rate

selected.

Note: Multiple injections can be

performed by simply pressing the

[INJECT] icon again and again.

The injection rate is independent of the

fill rate as programmed in the [SETUP]

mode.

Press the [EXIT] icon to exit back to the

operational mode screen.

Drummond Nanoject II Gebrauchsanweisung - Seite 6

Operational Modes