Absolare Passion Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Absolare Passion herunter. Absolare Passion 10 Seiten.

5. Connecting the Cables

5.1. Power cable

AC power input is via a standard IEC socket. Operating voltage must only be

changed by an authorized service agent.

The quality of the power cable used will affect the sound quality.

5.2. Signal Cables

You can connect 3 unbalanced or 4 balanced source devices at the same time. The

selector knob on the left hand side switches between the input channels. Output is

single-ended RCA or transformer balanced XLR depending on the version.

6. Operating the Unit

Absolare Preamplifier will be ready to operate seconds after turning on the power,

but attaining full performance may take 15 to 30 minutes.

Signal ground and chassis/power ground is separate inside the Signal Stage and

they are connected by a high pass filter to reduce hum and noise. The outside parts

of the RCA connectors are connected to signal ground. Balanced (XLR) version has

transformer balanced input and output on pins 2 and 3; pin 1 is connected to chassis

ground.

There are no adjustments for the preamp.

With the motorized remote control option you can change the volume setting with the

IR remote control. Operating angle is approximately 45°.

ABSOLARE Preamplifier User Manual 0.9