Annso DCC-150T Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender Annso DCC-150T herunter. Annso DCC-150T 12 Seiten. Cat6 kvm extender transmitter & receiver 150/300 meters

Seite drucken

< Part 3 > Keyboard Hotkey Command

You can switch the Receiver from "LOCAL" to "REMOTE" and vice-versa through simple key sequences

made by the remote console side. To send commands to the Receiver, you must press the hotkey (default is

Caps Lock) twice within 2 seconds. You will hear a beep sound conﬁ rming you are in the hotkey mode. If you

do not press any key during hotkey mode over 2 seconds, the hotkey mode will be terminated and back to

normal state.

The default hotkey is Caps Lock but you can change hotkey as your application convenience.

Example:

Caps

Lock

The table blow lists all the supported hotkey commands.

Command

To show OSD menu (only for DCC-300T/R)

To select Hotkey type on menu (only for DCC-300T/R)

To change user name and password (only for DCC-300T/R)

To log in (where to enter user name and password) -- only for DCC-300T/R

To switch between Local and Remote ports

To turn the beep sound on or off

To activate the Auto-Scan function. Auto-scan Remote

and Local port every 8 seconds repeatedly.

For auto-adjust video signal of remote port to optimum

Caps

Lock

Function

P.7