DryAIR HRA 6000 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Werkzeuge DryAIR HRA 6000 herunter. DryAIR HRA 6000 15 Seiten.

Seite drucken

3.Maintenance

*DANGER! It is very important that you read and understand this section before operating the
hose reel! Failure to follow the procedures and cautions in this manual could lead to injury or
possible death! *

Precautions

Electric shock will result in death or serious injury.
•
The user is responsible for conforming to all applicable code requirements with respect to grounding
all equipment.
•
Many parts in this drive controller, including printed wiring boards, operate at line voltage. DO
NOT TOUCH. Use only electrically insulated tools.
•
DO NOT touch unshielded components or terminal strip screw connections with voltage present.
•
Install and close all covers before applying power or starting and stopping the hose reel.
•
Before servicing:
o Disconnect all power.
o Place a "DO NOT TURN ON" label on the drive controller disconnect.
o Lock the disconnect in the open position.
•
Disconnect all power including external control power that may be present servicing the drive
controller.

Auto Resets

The drive controller is factory set and will reload its factory default settings each time the AC line is
connected. It will also automatically start when recovering from a series of different faults.

Manual Resets

If a fault occurs due to a prolonged overload, overvoltage, undervoltage or phase failure, the control
must be manually restarted. The control can be restarted by:
1) Disconnect AC power and wait for at least 30 seconds for drive controller to power down.
2) Reconnect the AC power. This will re-initiate the factory default settings.

Electric Motor

•
No regular maintenance is required.
•
Make sure that the motor is not in prolonged contact with
moisture during operation or storage.
Maintenance
3-1