AbsolutAire UC-3 Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Thermostat AbsolutAire UC-3 herunter. AbsolutAire UC-3 13 Seiten.
Auch für AbsolutAire UC-3: Benutzerhandbuch (14 seiten)
Seite drucken
Introduction
The Smart-Vue User Interface (UI) for the UC-3 Control System displays
the information necessary to operate and diagnose the Heating and
Ventilating Unit.
This is connected to the controller via a CAT-5E cable with a maximum
length of 600 feet.
HMI Screen Information
At the top left corner of the display there is a bell symbol. This is the system
alarm indicator. If an alarm is present in the unit this indicator will blink. If no
alarm is present this indicator will not be visible. At the top center of the
display is the indicator for indoor temperature. If an outdoor temperature is
being displayed the thermometer will be outside of the house. At the top
right of the display is the time in 12 hour format during normal display.
When navigating the menu, the menu title will be displayed here. Across
the center of the display is the data with the units of measure. The system
is capable of displaying up to 4 decimal places. At the bottom left is the fan
status. In the bottom center is the mode of operation and at the bottom
right is the occupancy status.
Three buttons are available for operation (see cover page). The center
button allows you to access the menu and scroll through the menu items.
The up/down buttons are used to change values.
Operation
The system has a scrolling display which displays the current Space
Temperature, as well as Building Pressure and Relative Humidity (if
equipped). The menu is separated into sub-menus for ease of use, and
only the options the unit is equipped with will be displayed. When
navigating the menu blinking items are set points that can be changed,
while non-blinking items are statuses which can be viewed only.
081721