DS maxi Anweisungen für den Zusammenbau - Seite 2

Blättern Sie online oder laden Sie pdf Anweisungen für den Zusammenbau für Inneneinrichtung DS maxi herunter. DS maxi 2 Seiten.

Seite drucken

Atach the adjustable feet

to the two side frames

Adjustable Foot - 4

Slide the shelf into the top

rails of one of the frames.

Slide the second frame

into the shelf.

It might be easier to get

someone to help with this

part. Screw the handbolts

in, but do not tighten

them yet.

Note: You might nd it

easier to install the bottom

rail after this this step.

Hand Bolt - 6

Once the stand is fully

assembled, Tighten the

Crossbrace and then the

handbolts.

Do one nal check to make

sure all of the nuts and bolts

are rmly tightened with

allen key.

Note: When the clothes dryer is operating on a spin cycle, the Dryer Stand Maxi may experience a small vibration. The Dryer Stand Maxi is stable and designed to

sustain such movements, so please do not be concerned if this occurs.

Caution: Ensure your clothes dryer with wet clothes does not exceed the maximum weight load of 100 kilograms.

Screw in the adjustable rails

to the side frames.

It is important that you make

sure you use the bottom rail

for the bottom of the side

frame.

Use the M8x45mm bolts to

tighten the tails.

M8x45 Bolt - 6

Fasten the two scross

braces to each other using

the centre hole and 15mm

M8 bolt and nut.

Attach the crossbrace to

the back of the frame.

Choose from 6 di erent

widths. The lower the

attachment are wider the

stand will be.

Please ensure both sides

match when installing

the cross brace.

M8x15 Bolt - 5

Cross Bar Nut - Qty. 1

Disconnect and remove your

washing machine. Place the Dryer

Stand Maxi in its space.

Move the washing machine in

between the stand and reconnect

the power cord and hoses.

Place your dryer on top of the

stand.