DS Produkte 47060 Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Beleuchtungsanlagen DS Produkte 47060 herunter. DS Produkte 47060 4 Seiten. Led light twigs

Seite drucken

Dear customer,

We are delighted that you have decided on these LED light twigs.

If you have any questions, contact the customer service depart-

ment via our website: www.dspro.de/kundenservice

Explanations of Symbols and Signal Words

Danger symbols: Read through the associated

safety notices carefully and follow them.

Read the instructions.

Symbol for direct current

Protection class III

WARNING warns of possible serious injuries and danger to life

CAUTION warns of slight to moderate injuries

NOTICE

warns of material damage

Proper use

•

The product is suitable for use as an indoor decoration.

•

The product is not suitable for outdoor use.

•

The product is not a toy.

•

The product is for private household use only. It is not intended

for commercial applications.

•

Use the product only for the intended purpose and as described

in the instructions. Any other use is deemed to be improper.

SAFETY INSTRUCTIONS

■

WARNING – Risk of suffocation! Children and animals must

be kept away from the packaging material.

■

WARNING – Risk of chemical burn by battery acid! Batter-

ies can be deadly if swallowed. Do not leave small children un-

attended with the product. They could take out the batteries. If

a battery is swallowed, seek medical assistance immediately.

■

CAUTION – Risk of chemical burn by battery acid! If a bat-

tery leaks, avoid physical contact with the battery acid. Wear

protective gloves if necessary. If you touch battery acid, rinse

the affected area with abundant fresh water immediately and

seek medical assistance.

NOTICE – Risk of material damage and damage to

property

■

Only use the battery type speciﬁ ed in the technical data.

■

Always replace all batteries. Do not use different battery types,

brands or batteries of different capacitances.

■

Take batteries out of the product when they are dead or if you

will not be using the product for a prolonged period. This will

prevent any damage if a battery leaks.

■

Immediately remove a leaking battery and clean the contacts.

■

Protect the product from: impacts, water or other liquids, mois-

ture, heat, direct sunlight and sub-zero temperatures.

■

The product must not be used if it exhibits visible damages.

■

Do not make any changes to the product and do not attempt to

repair it. In the event of any damage, please contact our cus-

tomer service department.

■

The individual LEDs cannot be replaced.

■

Do not in any case use any cleaners or rough sponges. They

could damage the surfaces. Dust the product off of, if soiled,

wipe it off with a damp, soft cloth.

Items Supplied

1 x bunch of LED light twigs with battery compartment

1 x remote control including 1 x 3 V button cell (CR2025)

4 x 1.5 V AA batteries

1 x instructions

Check the items supplied for any transport damage. Do not use

the items if they are damaged, instead contact our customer ser-

vice.

04771_DE-EN-FR-NL_A4_V1.indd 2

Product number: 04771

Before Initial Use

1. Insert the batteries into the battery compartment:

– Turn the two parts of the battery compartment apart and re-

move the battery holder.

– Insert the batteries in the battery holder. Ensure the correct

polarity (+ / –).

– Insert the battery holder onto the two contacts in the battery

compartment and screw it together.

2. Remove the insulating strip from the battery compartment of

the remote control to activate the battery.

3. Arrange the light twigs as desired.

Use

The lights are controlled via the remote control. The remote con-

trol has an associated button for each function:

OFF

Mode 1 – 8 Select lighting mode

DIM - / +

TIMER

If the power of the lights diminishes, replace the batteries.

Changing the remote control battery

4. Slide the battery compartment all the way back into the remote

control.

Technical Data

Product number: 04771

Model number:

Power supply

LED lights:

Remote control: 3 V DC (1 x 3 V button cell, CR2025)

Instructions ID:

Disposal

Dispose of the packaging material in an environmentally

friendly manner and take it to a recycling centre.

Batteries should be removed prior to disposal of the product

and disposed of separately from the product at suitable col-

lection points.

This product is governed by the European Directive

2012/ 19 / EU on waste electrical and electronic equipment

(WEEE). Do not dispose of the product as normal domestic

waste, but rather in an environmentally friendly manner via

an ofﬁ cially approved waste disposal company.

Customer Service / Importer

DS Produkte GmbH

Am Heisterbusch 1, 19258 Gallin, Germany

Tel.: +49 38851 314650 *

* Calls to German landlines are subject to your provider's charges.

Switch the lights on

Switch the lights off

Decrease / increase brightness

The lights turn off automatically after 6 hours and

turn on again after 18 hours. Press any key to turn

off the timer.

1. Turn the remote control upside

down with the buttons facing down.

2. The battery compartment is located

pull

on the narrow side of the remote

control. Remove it as shown.

3. Replace the empty battery with a

push

new battery (3 V, type CR2025).

DCH-120WW

6 V DC (4 x 1.5 V batteries, AA)

Z 04771 M DS V1 0619

Instructions

12.06.2019 13:28:47