Daily Youth Q3M Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Laufband Daily Youth Q3M herunter. Daily Youth Q3M 20 Seiten. Multi-function foldable motorized treadmill

Seite drucken

6.1.1

" Time window: to display the time. It counts time from 0: 00 to 99: 59 forward and when

it's99: 59, the treadmill runs steadily. Slow down the speed to stop first. When it displays

"End" and after the treadmill stops running for 5 seconds, the treadmill enters standby state.

The time window counts the time from the set time to zero backward. When the time is 0: 00,

the treadmill steadily slows down and stops running and the speed window displays "End".

After the treadmill stops running for 5 seconds, the treadmill enters the standby state.

6.1.2

" Distance window: to display the distance of sports. It counts from0.00 to 99.90 forward

and when it reaches 99.90, it resets. It counts from the set value to zero backward. When the

record is 0, the treadmill steadily slows down and stops running and the speed window

displays" End". After the treadmill stops running for 5 seconds, the treadmill enters standby

state.

6.1.3

"Calorie window: to display the calorie value consumed. It counts from 0.0-999.0. When

the calorie value exceeds the maximum, it resets and counts again. It counts backward from

the set value to 0.When the record is 0, the treadmill steadily slows down and stops running

and the speed window displays "End". After the treadmill stops running for 5 seconds, the

treadmill enters standby state.

6.1.4

" Speed window: to display the current speed value in the operation state. The speed

range is 1.0-12.0KM/h.

6.1.5

" Heart rate window: to display the heartbeat rate of the runners. When the runners hold

the heartbeat sensing handle, the treadmill can automatically detect and record their

heartbeat rate and display it in this window. The display range of the heartbeat 50-200

times/minute(This data is for reference only, and can't be used as medical data.)

6.2 Key function:

6.2.1

"Procedure/Mode key: In the standby state, the three modes "30: 00","1.00","50.0" can

be selected circularly by touching this key. "P1-P2-...-P12-U01-U02-U03-FAT" ,"0: 00", When

selecting each mode, the "speed +/-"keys can be used to set the relevant inverted value.

After the value is set, the treadmill can be started by touching the "start" key.

6.2.2

"Start/Stop key: In cast the power is on and the safety lock is closed, press this key at

any time to start the treadmill. During the operation of the treadmill, press this key to stop the

treadmill and reset it.

- 10 -