DS Produkte FS014 Anleitung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Home Lighting Zubehör DS Produkte FS014 herunter. DS Produkte FS014 6 Seiten. Christmas star with led

EN
When needed, wipe the product off with a dust cloth.
Keep the product in its original packaging out of the reach of
children and animals in a dry, clean place that is protected from
direct sunlight.
Only use the supplied or a manufacturer-recommended remote
control to switch the product on and off.
Product contents
1 x wooden Christmas star
1 x LED light chain with remote control
2 x battery (1.5 volt, type AA) for the light chain
1 x battery (3 volt, type CR2025) for the remote control (already
inserted)
Prior to fi rst use
1. Unpack the product. Check that the product contents are
complete and that they do not exhibit any transport damages.
Should you identify any transport damages, do not use the
product (!), instead please promptly consult the customer
service. Hold onto the packaging to store the product when
not in use.
2. The battery is already inserted in the remote control when
delivered and has a transport guard. Take the protective strip
out of the remote control.
3. Open the Christmas star and insert the batteries in the battery
box (see "Inserting / changing batteries" chapter, "Light chain"
section).
Inserting / changing batteries
Light chain
1. Open the Christmas star by carefully releasing the front and
back side and removing the front side.
2. Open the battery box by pushing the battery box cover towards
the cable. ATTENTION: The light chain and thus the battery
box are glued to the back side of the Christmas star and cannot
be removed completely!
3. Take off the cover and insert the batteries. In the process,
make sure that the polarity is correct (+ / –).
4. Place the cover back on the battery box and push it until it
locks into place.
5. Place the battery box back in the middle of the Christmas star.
6. Close the Christmas star by mounting the front side on the
back side again and fi rmly pushing it down.
7. Select a place, where you want to hang the star and install the
desired mounting materials there. Please be absolutely sure
to observe the safety notes on proper handling of the product.
Remote control
The batteries have already been inserted upon delivery and
have been provided with a transport guard. Remove the
protective strip before fi rst use.
1. Open the battery compartment on the back side of the remote
control.
2. If necessary, remove the used battery and insert a new 3 V
battery (type CR2025). In the process, make sure that the
polarity is correct (+/–).
3. Then close the battery compartment.
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
Operation
You can now activate and deactivate the light chain in the
Christmas star using the remote control.
1. Push the ON button on the remote control to activate the light
chain.
2. Push the OFF button on the remote control to turn the light
chain off.
Troubleshooting
Problem
The star does not
respond to the
remote control.
Technical data
Product number:
Model number:
Power supply:
Remote control:
Star:
Disposal
The packaging material is recyclable. Dispose of the
packaging in an environmentally-friendly manner and
make it available to the collection service for recyclable
materials.
Dispose of the product in an environmentally-friendly
manner. The product does not belong in the household
garbage. Dispose of it at a recycling centre for old electric
and electrical equipment. For more information, please
contact the administration in your community.
Batteries must be removed and disposed of separately
before disposing of the product. To protect the environment,
batteries and rechargeable batteries may not be disposed
of together with normal household waste. Instead they
must be turned in at appropriate collection points. Please
also observe applicable statutory provisions regulating the
disposal of batteries.
Customer Service / Importer:
All rights reserved.
Possible cause / solution
Have batteries been inserted in the
battery box and remote control?
Are the batteries too weak or
improperly inserted?
Is the star within range of the
remote control?
01941
FS014
3 V DC
(1 x button cell, type CR2025)
3 V DC
(2 x 1.5 V type AA battery)
+49 38851 314650 *)
Z 01941 M DS V1 0816
Instructions