Fox Electronics GR2015-R Anleitung Handbuch - Seite 11
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Heizgerät Fox Electronics GR2015-R herunter. Fox Electronics GR2015-R 12 Seiten.
Seite druckenbu�on con�nuously. The machine works at the "low heat - high heat - cold wind" cycle, and the
corresponding indicator light is on or off.
3) When the machine is in working state, press the "
se�ng, each �me it is pressed, it will increase by 1 hour, up to 15 hours, and the corresponding
indicator will light up. The opera�on ends, and the machine will stop working when the �ming
se�ng �me is reached.
4) In the power on state, press the "
turned on or off, and the corresponding indicator light is on or off.
5) When the whole machine is working,press the "
sequence according to the temperature of "22
indicator light will light up. When the room temperature reaches the preset temperature, the
machine will automa�cally shut down, and the fan will shut down a�er a delay of 30 seconds,
and the machine will enter standby mode. When the room temperature is lower than the preset
temperature, the machine automa�cally starts and enters the working state.
HOW TO USE THE REMOTE CONTROL:
The remote control use one bu�on cells, model No.CR2025 ( 3V ) . We recommend the use of
Lithium type ba�ery for longer use.
Note : Please follow ba�ery disposal instruc�on on ba�ery packaging , or contact
your local councils for safely disposal of ba�eries.
INSTALLATION
Base installa�on instruc�ons: (Please confirm whether the accessories are complete and the
product is in good condi�on before use)
1. Take the base(1 set) and screws(3pcs) pack out of the packing case.
2. Take out the whole machine, align the limit column at the bo�om of the whole machine with
the limit hole of the chassis, install it in place, and finally lock the screws clockwise. (as shown in
the picture below)
" bu�on, the machine is in the �ming
" bu�on one or more �mes, the oscilla�on func�on is
" bu�on, and the machine will cycle in
-25
-28
", while the corresponding