Fox-Lux FXEXB-D Hinweise zu Installation, Wartung und Instandhaltung - Seite 2
Blättern Sie online oder laden Sie pdf Hinweise zu Installation, Wartung und Instandhaltung für Beleuchtungsanlagen Fox-Lux FXEXB-D herunter. Fox-Lux FXEXB-D 2 Seiten. Led emergency exit blade
Seite drucken
FXEXB LED Exit Blade
Product Variants and Part Numbers
Reference
Description
FXEXB/M/3
Emergency Exit Blade 3hr Maintained (standard)
Emergency Exit Box 3hr Maintained
FXEXB-S/M/3
FXEXB-D
DOWN ARROW legend panel
LEFT/RIGHT ARROW legend panel
FXEXB-LR
UP ARROW legend panel
FXEXB-U
FXEXB-RK
Recessing Kit
*Remote Control REM10 allows the competent user to carry out functional tests and/or full duration tests at any time and to check system status. Please refer to REM10 user guide.
Installation Guide
1: Isolate mains
Ensure that the mains supply is switched off before
installing, maintaining or servicing the luminaire.
4: Electrical connection
0.75-1.5mm
Blue
N
Brown
L
(Permanent)
Black
SL
(Switched)
Secure mains cable by using cable clip and
screws supplied in the box.
7: Attach body to base
Body
(self-test)
2: Remove mounting base from body
Body
5: Electrical connection
Non-maintained
2
8+1mm
This product is classified as Class II.
Earth connection not required
8: Restore mains supply
Charging
Indicators &
Test Switch
t | +44(0)1543 396400 | e | [email protected] | w | www.fox-lux.co.uk
Registered Office: Alex House 260/8 Chapel Street, Salford, Manchester, M3 5JZ
Company Registration No. 11821284 VAT Registration No. 320 9921 12
Testing
Manual
Self-test
3: Install mounting base
Charging
Indicators &
Test Switch
A blank white sheet is included in
the box. Please consider replacing one
"UP arrow legend" (fitted on one side of
the luminaire) for the blank white sheet
if required by BS 5266-1:2016.
6: Complete labels
Switched
Maintained
Remote
Operating
control
temp. ta
0°C - 40°C
REM10*
Wall mount
Ceiling mount
*supplied screws and wall plugs are suitable
for masonry only.
Please purchase alternative fixings if required.
Part.No.:
Input voltage: 220-240V AC 50Hz
X
1
180
Installation date: __ / __ / ____
-
Enter installation date on battery label
-
Enter
the appropriate
code on the luminaire label
Net
weight
1.0kg
0.04kg
0.15kg
lssue V1: 5/1/2020