DS18 DSP8i Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte DS18 DSP8i herunter. DS18 DSP8i 12 Seiten.

NO.

OPERATIONS & CONTROLS

Before connecting the power supply, you must confirm that the power supply meets

the designated power requirements and connect in strict accordance with the

equipment instructions. Otherwise, the equipment may be damaged and may cause

accidents such as fire, electric shock, etc.

Remote Turn-ON Singal In/Out

REM IN: Connect it to the ACC control output Singal. The processor will switch on/off

automatically with vehicle ACC signal on/off.

REM OUT: It provides separate REMOTE signal output to the other amplifiers to

control other amplifiers switch turn on/off. Note: the starting signal of the external

power amplifier must be taken from the REM OUT terminal of this equipment.

Low Level Signal Input Terminal

Support maximum 6 channels

AUX Lower Signal Input Terminal

Support 2 channels RCA stereo input.

External USB Drive Port

It can read music files from USB Drive, support four formats of audio files of

APE/WAV/WMA/MP3. If the USB Drive failed to read, please format USB Drive into

FAT 32. External USB Drive can support up to 64G.

USB External Computer Control

This DSP can be directly connected and tuned using a type-c USB connection via the

standard USB 3.0 interface.

Optical Stereo Digital Signal Input Port

Switching amplifier audio source to optical input can play stereo digital signal output

from vehicle CD or external sound source. Optical sampling rate supports 24 Bit / 96

KHz.

High Level Signal Input Terminal

Support maximum 6 channels.

External Wired Controller Port

Using standard accessory wired controller, you can select input source select presets,

adjust total volume and slave volume, Mute, and switch between the last song and the

next song from Bluetooth/USB Drive.

BLUETOOTH AUDIO STREAMING

The DSP8i has Bluetooth connectivity to play all your favorite audio from your smartphone,

tablet, or PC. Use it directly with the DSP8i as a main or auxiliary source of audio.

Pairing: Go to the bluetooth menu in your device and start to scan for any new BT devices.

You will foind a device named "DS18-DSP8i." Select this device to start the pairing process.

It may be required to enter a password for the first time. The password is "1234."

Using the DSP8i remote control, select BT source and adjust the desire volume. Now. start

to stream or play any kind of audio from your device. On the DSP8i Remote Control you can

use the forward and backward buttons to control your music.