Daintree GE current WHS100 Installationshandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör Daintree GE current WHS100 herunter. Daintree GE current WHS100 9 Seiten. Wireless high bay sensor
Seite drucken
Daintree
Wireless High Bay Sensor (WHS100)
®
1
Installation Process (continued)
If there is unwanted coverage, use the Mask provided to limit
the sensor's view. Attach the mask inside the lens: align the holes
in the mask with the studs under the gasket.
11. Walk test the sensor. Walk outside the coverage area
and wait for the Green LED to stop flashing. Step inside
the desired coverage area and observe the Green LED.
• Repeat from various positions in the coverage area.
• If you do not observe the proper behavior, see
Troubleshooting.
2
Placement Guidelines
• The PIR sensor must be 4' to 6' away from hot or cold
sources such as heat or cooling vents, refrigerators, stoves,
etc. Do not install the PIR sensor near strong air flows.
• The PIR sensor must have clear line of sight to the coverage
area. It may not detect a human body if it is blocked by the
fixture housing, furniture, plants, glass, curtains, etc.
• Secure to a stable fixture to minimize sensor vibration.
3
Mounting
The dimensions of the WHS100 when mounted are:
3.54" L x 3.54" W x 1.78" H (90mm L x 90mm W x 45.4mm H).
The WHS100 has a threaded nipple on the side; the WHS100-BM
has a threaded nipple on the base for mounting to the bottom
of a fixture. In wet locations, attach the WHS100 to a watertight
fixture or enclosure.
WHS100-BM Base Mount
WHS100
WHS100-BM
2
4
LED Operation
Red LED: Network
Description
Indicator
Hardware problem.
Solid
Fast Flash (1x/sec, 1 HZ)
Not connected to a Zigbee network.*
Slow Flash (1x/10 sec,
Connected to a Zigbee network but
0.1 HZ)
not assigned to a zone.
Off
Normal operation, connected to
a Zigbee network and assigned
to a zone.
Green LED: Motion
Description
The Green LED flashes each time
Flash
sensor detects occupancy.
Off
Normal operation not detecting
occupancy.
* See Joining the Zigbee Network
WHS100 Side Mount
Installation Guide