Daintree WWD2-4IW Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Kontrollsysteme Daintree WWD2-4IW herunter. Daintree WWD2-4IW 8 Seiten. Wireless controls wireless scene switch

Seite drucken
Daintree® Wireless Controls
Wireless Scene Switch(WWD2-4IW)
Installation of Device into Back Housing
1
Use two standard screwdriver
to remove the devices from
the back housing
4
Install the main body of the
device into the back housing.

Network Reset

2
Separate the battery cover
from the device. Pull the
plastic insulation strip out
of the battery compartment.
Put the battery cover back
on the device.
5
Install the faceplate onto the
device. Note: Device supports
the use of other standard
faceplates on the market.
To reset the network of the device,
remove the faceplate from the
device. Then press and hold the
reset button for 5 seconds. Install
the faceplate back onto the device.
Press either dimming up or down
button to enter the pairing mode
to join the device to a network.
3
Installation Guide
3
Insert the back housing piece
into the junction box and
secure with two screws.