DSC 2550 Handbuch für häufig gestellte Fragen - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für häufig gestellte Fragen für Sicherheitssystem DSC 2550 herunter. DSC 2550 18 Seiten.

Seite drucken

A WORD ABOUT YOUR SYSTEM

The PC2550 Security System has been designed to give you the greatest possible

flexibility and convenience. Read this manual carefully and become familiar with the

operation of your Security System. Your installer will tell you which commands listed

in this manual apply to your system. Fill out the SYSTEM REFERENCE sheet in this

manual and store it in a safe place for future reference. The label provided for the

inside of the keypad door can be used to record which sensors are on each zone.

IMPORTANT NOTE

Remember that no security system can prevent emergencies. It is only

intended to alert you in case of an emergency and should not take the

place of prudent security practices or life and property insurance.

Notes for UL Installations

The PC2550 is suitable for the following UL installations:

• Household Fire and Grade A Burglary

• Grade A Local

• Grade B Central Station

• Grade A Police Station Connect with Basic Line Security

• Grade C Central Station

• Grade A Police Connection with Basic Line Security

It is important to test your system every week. To do this, first inform the monitoring

station that you are testing your system. Then, with the system disarmed, activate all

detection sensors one at a time and observe the zone light come on at the keypad

as each sensor is activated. Perform a bell test by entering [

with the system disarmed. The PC2550 can be programmed at the time of installation

to automatically perform a test transmission to the monitoring station on a regular

basis. If the system has not been programmed for this automatic test, call the

monitoring station for instructions on how to perform a test transmission. Don't forget

to inform the monitoring station when you have finished your test.

Check to see if the "Trouble" light is on when arming the system. See the

Trouble Display section in this manual for a description of the different trouble

conditions. Contact your installer for assistance if the trouble condition cannot

be located and corrected.

HOW YOUR SYSTEM WORKS

Your Security System is made up of a control panel, one or more keypads, and

various detectors and sensors. The control panel will be mounted out of the way in

a utility room or basement. The metal cabinet contains the system electronics, fuses

and stand-by battery. There is normally no reason for anyone but the installer to

have access to the control panel. The keypad(s) have an audible indicator, display

lights and command entry keys. The keypad is used to send commands to the

system and to display the current system status.

convenient areas close to the exit-entry doors. The security system has up to eight

zones or areas of protection. Each zone used will have connected to it various

sensors, such as door or window contacts, motion detectors, glassbreak detectors

and vibration or shock sensors. When a sensor is in alarm, a keypad light will be

on to indicate which zone is in alarm.

Keypads are mounted in

∗

][6][Master Code][8]