DAITEM 145-21X Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Sicherheitssensoren DAITEM 145-21X herunter. DAITEM 145-21X 19 Seiten. Outdoor motion detector 2 x 12 m

Seite drucken

3. Programming

IMPORTANT: during recognition

programming, the product to be programmed

for use with the control panel does not need

to be placed next to it. In fact, we recommend

you place the product at a short distance

from the control panel (at least 2 m away).

1. Change the control panel to installation

mode if necessary by pressing the

following sequence on the control panel

keypad or the hardwired control interface

master code

then:

engineer

installer code

2. Programme the detector as follows:

"detector X"

then

10 s max.

Press and hold the

Press

then

"test" button until

on the control

the control panel

panel keypad

responds

IMPORTANT: the control panel indicates there is an e

When this happens programming should be carried out

"group?"

"time delay?"

The control panel

Select the time delay:

waits for a group

0: immediate

to be chosen (from

1: delayed

1 to 8)*. Choose

2: combined

the groups by

Use the control panel

pressing the

keypad to do this.

corresponding

numeral on the

control panel keypad

* Depends on the type of the control panel

rror by emitting 3 short beeps.

again.

"beep, detector X,

group Y, immediate

(or delayed

or combined)"

The control panel

gives a voice

message to

conﬁrm