DAITEM 155-21X Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Sicherheitssensoren DAITEM 155-21X herunter. DAITEM 155-21X 20 Seiten. Radio heat sensor

Seite drucken
In stand-alone mode, the heat detector responds as follows during the heat detection period:
Red LeD indicating
detector status
Heat detector
the LED flashes
transmitting the heat
detection signal
other hard-wired
interconnected heat
detectors
iMPoRtAnt: the heat detector should be replaced every
ten years.

1.2 Description

Red LED indicating detector status
Test button
White LED
(safety lighting
when heat is
detected)
guarantee sticker: remove the pre-cut part of the sticker and stick it to the guarantee
certificate in the user manual supplied with the control panel. If you are adding the siren to
an existing system, use the guarantee sticker provided with this product.
White LeD
a safety
halo lights
quickly
up
a safety
-
halo lights
up
Sounding
a built-in modulated alarm
sounds on a continuous
basis (85 dB(A) at 3m)
a built-in modulated alarm
sounds on a discontinuous
basis (85 dB(A) at 3m)
Guarantee sticker
Programming
key 0
95
When connected to a Daitem
alarm system the detector
responds as follows when it
detects heat:
• triggering of the control
panel and security system
wireless sirens in fire
sounding mode for 5 min.,
• triggering of the telephone
dialler.
Product
replacement
date
Lithium
battery
connector
GB