DAITEM SH148AX Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Sicherheitssensoren DAITEM SH148AX herunter. DAITEM SH148AX 18 Seiten. Outdoor ir anti-masking 5 m

Seite drucken

7.2 Adjusting the detection angle horizontally

To set the detection zone:

1. Remove the locking

mechanism using a

ﬂat-headed

screwdriver. Carefully

insert the screwdriver

into the right-hand

and then left-hand

openings and push

upwards.

2. Hold the detection module and

point it in the required direction

adjusting it 5° at a time.

3. For protection along a vertical surface (wall, bay window, etc.), it is advisable

to align the detection zone parallel with this surface:

• for improved detection,

• to reduce interference caused by this surface.

The marks on the locking system help to achieve the

optimal adjustment in this configuration. Choose the

mark located on the opposite side of the surface

before repositioning the locking mechanism.

Detection zone setting range

Top view

Setting range: 95°

(in 5° adjustments)

Setting range: 95°

(in 5° adjustments)

4. Reposition the locking mechanism to block the

detection module in its ﬁnal location.

Locking

mechanism

IMPORTANT: check that the

locking mechanism is properly

inserted in the slots.

5° adjustments