ansio 1001 Benutzerhandbuch für Installation und Betrieb - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Installation und Betrieb für Fan ansio 1001 herunter. ansio 1001 7 Seiten. 30” tower fan with remote
Seite druckenButton Operation Tone
By default, the fan will produce an audible beep whenever a button is pressed on the fan
control panel or remote. If needed, this beep tone can be switched off by holding the TIMER
and MODE buttons down together for 3 seconds on the Control Panel only and NOT on the
remote.
Note: If the power supply is disconnected, the fan will revert to the default mode with audible
beep on.
Note for the Remote Control
• The remote control will work at a distance of up to roughly 5 metres and at an angle of 30
degrees from the control panel
• Avoid placing the fan in direct sunlight as this may affect the operation of the remote control
• Remove the remote-control batteries before disposal of the product
Battery replacement
• Remove the battery cover on the back of the remote control
• Replace with 2 pieces of UM-4 AAA / R03 batteries
• Carefully reseat and close the battery cover
Note on Battery
• To prevent the risk of leakage or explosions, never apply heat, dismantle or attempt to
recharge the batteries. When the unit is not going to be used for a long time period, remove
the remote control batteries to avoid battery leakage.
• If the battery has leaked, throw it away. Thoroughly clean the battery compartment using a
dry cloth.
CARE AND MAINTENANCE
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service
personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free
of dust. Do not disassemble the fan to remove dust.
3. Wipe the exterior parts with a soft cloth soaked in a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
5. Do not use any of the following as a cleaner: gasoline, thinner, bending.
6. Do not allow water or any other liquid into the motor housing or interior parts.
7. When not in use, store the fan (preferably in its original box) in a cool, clean and dry
location.
Customer Support - UK Toll Free 0800 080 6781 or +44 207 157 9795
| 5
P a g e
(Jan'23v.01)