ansio VENUS Anleitung und Betriebshandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Anleitung und Betriebshandbuch für Heizgerät ansio VENUS herunter. ansio VENUS 9 Seiten. Ptc ceramic tower heater
Seite drucken
SAFETY PROTECTION FEATURES
1. Overheat protection feature: When the temperature of the heater is too high, the
thermostat will automatically turn the heater OFF. When the heater cools down
completely, it can be used normally. Improper usage of the heater, dusty
environment etc. can cause this. The heater needs to be cooled down completely
and can be re-used as normal.
2. Accidental Tip-Over protection feature: When the heater is accidentally tipped
over, the safety tip-over protection feature will automatically cut the power off.
When the heater is placed in an upright position on an even surface, it can then be
used normally.
3. Anti-frost function: When the machine is on, turn the Temperature Control knob
to the "MIN" position, and whenever the room temperature drops to 0-5ºC, the
heater will automatically turn on. When the room temperature is over 5ºC, the fan
heater will automatically turn off.
PILOT LIGHT
The heater has a pilot light which illuminates whenever the heater is plugged in and
turned ON. The light will continue to glow even if the safety feature turns OFF the
heater in the event of overheating. This helps you to be aware that the heater is still
in operation and is controlling the room temperature.
CLEANING AND MAINTENANCE
Before attempting to clean this heater, always ensure that the power plug is
removed, and the heater is cooled down completely.
1. Accumulated dust must be removed from the heater with a soft cloth. Wipe the
exterior surface of the heater with a cloth moistened (not dripping wet) with a
solution of mild detergent and water. Dry the heater thoroughly with a soft dry cloth
before operating it.
2. Store heater in a clean and dry place when not in use.
3. Do not scrap the surface of the heater with sharp tools. This is to avoid the surface
getting rusty by damaging the paint coating.
4. The fan motor is lubricated by the factory and will require no further lubrication.
5. No other user maintenance is required or recommended.
NOTE: Portable electric heaters are designed to be a supplementary heating source.
They are not intended to be the main source of heating.
ANSIO 1320 (M21v01)
6