DSC SCW9045-868 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitssystem DSC SCW9045-868 herunter. DSC SCW9045-868 20 Seiten. Self contained wireless
Auch für DSC SCW9045-868: Benutzerhandbuch (20 seiten)

Seite drucken

bypassed when arming your system. Zones cannot be bypassed once the system is armed. Bypassed

zones are automatically cancelled each time the system is disarmed and must be bypassed again, if

required, before the next arming.

Bypassing Zones

With the system disarmed.

1. Press

to enter the function menu. The keypad will display "Press

2. Press

Bypass Zones".

3. Enter the two-digit number of the zone(s) to be bypassed (01-34).

You can also use the

zone. The keypad will display "Zone Name". "B" will appear on the display to show that the zone is

bypassed. If a zone is open (e.g., door with door contact is open), the keypad will display "Zone Name

O". If you bypass the open zone, a "B" will replace the "O".

4. To unbypass a zone, enter the two-digit number of the zone(s) to be bypassed (01-34). You can

also use the

disappear from the display to show that the zone is no longer bypassed.

5. To exit bypassing mode and return to the Ready state, press

Activating All Bypassed Zones

To remove bypass (all zones):

1. Press

, then your [access code] (if necessary).

2. Press

3. To exit bypassing mode and return to the Ready state, press

Recalling Bypassed Zones

To recall the last set of bypassed zones:

1. Press

, then your [access code] (if necessary).

2. Press

3. To exit bypassing mode and return to the Ready state, press

Bypass Group

A Bypass Group is a selection of zones programmed into the system. If you bypass a group of zones

on a regular basis, you can program them into the Bypass Group, so that you do not have to bypass

each zone individually every time. Only one Bypass Group can be programmed.

NOTE: If a group has already been bypassed before programming a Bypass Group, you will be

unable to recall that group after programming the new group.

To program a Bypass Group:

1. Press

, then your [access code] (if necessary).

2. Enter the two-digit numbers (01-34) of the zones to be included in the Bypass Group or

use the

to select the zone.

3. To save the selected zone into the group, press

4. To exit bypassing mode and return to the Ready state, press

NOTE: If an access code is required to enter bypassing, only the Master Code and codes with

Supervisory enabled can set the Bypass Group.

, then your [access code] (if required). The keypad will display "Scroll to < >

keys to find the zone to be bypassed, and then press

keys to find the zone, and then press

keys to find the zone to be included in the bypass group, then press

to select the zone. The "B" will

for < > Zone Bypass".

to select the