DSC WLS904-433 Einbauanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Einbauanleitung für Sicherheitssensoren DSC WLS904-433 herunter. DSC WLS904-433 4 Seiten. Wireless motion

Battery Installation
• This system is designed to work with Eveready Alkaline Energizer
Batteries. Do not install any other type. The reliability of the security
system depends on its batteries, and "no name" or generic brand
batteries may not provide the best quality and dependability.
• Use fresh batteries. Most batteries have a "best before" date printed on
their packaging or on the batteries themselves. Buy batteries that have a
"best before" date of two years or more from your purchase date.
• When disposing of used batteries, follow the instructions and precautions
printed on the batteries. Many cities and communities have collection
sites or services for used household batteries. Contact your municipal
offices for information on the disposal of used batteries.
Remove the motion detector from its
mounting plate by holding the sensor by
its sides and pushing up. Install four
fresh Eveready Alkaline Energizer AAA
batteries. Be sure to insert the batteries
in the proper orientation. Replace the
sensor on its mounting plate, making
sure it snaps into place.
After all the batteries are installed, the detector will take 60 seconds to warm
up. During this time the LED will flash slowly.
Limited Warranty
Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase,
the product shall be free of defects in material and workmanship under normal use and that in
fulfilment of any breach of such warranty, Digital Security Controls Ltd. shall, at its option, repair
or replace the defective equipment upon return of the equipment to its repair depot. This warranty
applies only to defects in parts and workmanship and not to damage incurred in shipping or
handling, or damage due to causes beyond control of Digital Security Controls Ltd. such as
lightning, excessive voltage, mechanical shock, water damage, or damage arising out of abuse,
alteration or improper application of the equipment.
The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and
all other warranties, whether express or implied and of all other obligations or liabilities on the part
of Digital Security Controls Ltd. This warranty contains the entire warranty. Digital Security Controls
Ltd. neither assumes, nor authorizes any other person purporting to act on its behalf to modify or
to change this warranty, nor to assume for it any other warranty or liability concerning this product.
In no event shall Digital Security Controls Ltd. be liable for any direct , indirect or consequential
damages, loss of anticipated profits, loss of time or any other losses incurred by the buyer in
connection with the purchase, installation or operation or failure of this product.
Warning: Digital Security Controls Ltd. recommends that the entire system be completely tested
on a regular basis. However, despite frequent testing, and due to but not limited to, criminal
tampering or electrical disruption, it is possible for this product to fail to perform as expected.
©1999 Digital Security Controls Ltd.
Printed in Canada 29003038 R001