FOXFURY 420-009RS Produkthandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Produkthandbuch für Taschenlampe FOXFURY 420-009RS herunter. FOXFURY 420-009RS 7 Seiten. Command series

Seite drucken

PHYSICAL CHARACTERISTICS

Please read below before using your Command headlamp as it relays

beneficial operating and safety information.

P/N

NAME

Command LoPro

410-L06

(White)

Command Tilt

410-T09

(White)

Command+ LoPro

420-L06

(White & Green)

Command+ Tilt

420-T06

(White & Green)

Command+ Tilt

420-T09

(White)

Command+ Tilt

420-T15

(White & Amber)

COMMAND RECHARGEABLE

P/N

NAME

Command+ LoPro

420-L06R

(White & Green)

Rechargeable

Command 20

420-009RS

Tasker S

Rechargeable

WARNINGS

Do not stare into LEDs for long periods of time or from a close range of

less than 2ft (0.6m).

DIMENSIONS

WEIGHT

(L x W x H)

5.3" x 0.7" 1.0"

(135 x 18 x 25mm)

4.8" x 1.0" 1.0"

(122 x 25 x 25mm)

8.4oz (238g)

5.3" x 0.7" 1.0"

Elastic Strap

(135 x 18 x 25mm)

9.8oz (278g)

Silicone Strap

4.8" x 1.0" 1.0"

(122 x 25 x 25mm)

DIMENSIONS

WEIGHT

(L x W x H)

8.4oz (238g)

5.3" x 0.7" 1.0"

Elastic Strap

(135 x 18 x 25 mm)

9.8oz (278g)

4.8" x 1.0" 1.0"

(120 x 25 x 25 mm)

Silicone Strap

BATTERY

The Command Series requires four (4) AA batteries. Acceptable battery

types include: Alkaline or rechargeable Alkaline, rechargeable NiMH or

LiFeS

(all are 1.2 to 1.6 volts each).

Do not leave batteries in the Battery Pack for periods longer than three

(3) months without use.

Be sure to check the Battery Pack every month for battery corrosion.

NOTE: Corrosion from leaking batteries is NOT covered by the warranty .

NOTE: Mixing of new and used, or different brand batteries is not

recommended as this could lead to leakage or explosion.

BATTERY INSTALLATION

Open all six (6) of the Battery Pack Tabs.

Insert four (4) AA batteries. Reference the plus ( + ) and minus ( - ) symbols

located on the inside of the Battery Pack for proper installation.

REASSEMBLING THE BATTERY PACK

Once batteries are installed, test the light's performance by activating the

Power/Mode Switch located on the top of the light.

Secure the Battery Pack Cover by snapping all six (6) Battery Pack Tabs.

A 'click' should be heard as the snaps are shut.

NOTE: Make sure the Battery Pack is properly closed to maintain a

water tight seal.

(WATCH THE VIDEO: FOXFURY .COM/VIDEOS)