Anslut 002-656 Betriebsanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Flutlicht Anslut 002-656 herunter. Anslut 002-656 10 Seiten.

Seite drucken
Anslut 002-656 Betriebsanleitung

SAFETY INSTRUCTIONS

•
Always take basic safety precautions when
using electrical appliances to reduce the
risk of fire, electric shock and/or personal
injury. Carefully read all the safety
instructions before use.
•
Keep the product under careful
supervision when it is used by, or near
children. Keep children under supervision
to make sure they do not play with the
product.
•
Do not immerse the product or charger in
water or any other liquid – risk of fire and/
or electric shock.
•
Do not use the product near flammable
materials, or burn it – risk of explosion.
•
Do not expose the product to severe
strain, this could result in permanent
damage.
•
Never point the beam at the eyes of
people or animals.
SYMBOLS
Description of symbols used on the product.
Familiarise yourself with them to reduce the
risk of personal injury and material damage.
Approved in accordance with
the relevant EU directives.
For indoor use only.
(This symbol is on the battery
charger)
Safety class II, extra or double
insulation.
DESCRIPTION
1.
Extra bright 10 W LED spotlight.
2.
2 brightness modes
3.
Flashing light
4.
Requires 1 6 V flat battery, or 4 alkaline D
batteries (sold separately).
5.
Battery life: about 10 hours with normal
brightness, 5 hours with high brightness
and 15 hours in flashing mode.
USE
Select required mode with the mode selector
(1) on the casing.
Normal brightness → High brightness →
Flashing mode
1.
Mode selector
2.
LED spotlight
FIG. 1
INSERTING THE BATTERIES
•
Twist the cover anticlockwise and remove.
•
Take out the light frame and battery holder.
•
Insert 4 D batteries into the holder, with
the correct polarity.
•
Replace the battery holder and light
frame, and screw tight the cover.
FIG. 2
MAINTENANCE
Clean the product with a cloth moistened with
a mild detergent. Make sure no liquid gets into
the product. Never immerse any part of the
product in water or any other liquid.
NOTE:
•
The product must only be serviced by
qualified service personnel using identical
spare parts.
•
Make sure that the product is completely
dry before using it.
EN
9