Foxpro HELLFIRE Gebrauchsanweisung - Seite 18

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Redner Foxpro HELLFIRE herunter. Foxpro HELLFIRE 20 Seiten.

Seite drucken

Check it out before heading into the field! If you are getting your caller out for the first time

this season, take it out back and check it out before you head out on a hunt. Check your remote

range, fidelity, high volume, low volume, battery life, etc. Being prepared and ensuring proper

functionality before heading out on a trip can help you decide if you need new batteries, if it

needs service, or if everything is working well. This can help prevent cancellation of trips and

potential disappointment.

9. Troubleshooting

This section will cover the troubleshooting aspects for the Hellfire and TX9 remote control.

The most common problems are battery related. Before performing anything else, try installing

fresh batteries. When your batteries get low, in either the Hellfire or the TX9 remote,

unexpected operation can occur. You can experience such things as loss of audio quality, loss of

remote control range, and other abnormal results.

Problem

Hellfire will Not Turn On

Hellfire does not produce any

sound

TX9 remote not controlling

Hellfire

Cannot transfer sound list to

TX9

TX9 remote does not turn on

Having trouble with

programming new sounds

10. Maximizing Remote Range

Remote range can be affected by many factors. Some of these factors can be controlled while

others cannot. In order to achieve the best possible remote range with your Hellfire digital

game call system, it is recommended that the following points be observed:

Always use high quality alkaline or lithium cell batteries in the remote.

•

Solution

Make sure that you have fresh batteries installed. If you

are using rechargeable batteries, make sure they are fully

charged. Inspect your battery tray and make sure the

springs are not compressed or corroded as this could lead

to poor battery connectivity.

Make sure the Hellfire is turned on. If you still cannot play

sounds, connect the Hellfire to a computer and inspect

the sound files for missing files or signs of corruption.

See section 10 "Maximizing Remote Range"

This typically stems from an error in the play list on the

Hellfire. If you recently added new sounds, double-check

the programming for errors such as duplicate or missing

sound numbers.

Install a new 9V battery.

Check out FOXPRO's website for detailed programming

information for your Hellfire. Solutions for many common

issues can be found there.