Foxpro Patriot Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Jagdausrüstung Foxpro Patriot herunter. Foxpro Patriot 17 Seiten.

TX433 Transmitter Detailed Information

This section covers the TX433 in detail including breakdowns and explanations of each menu item.

When powered on, the TX433 briefly displays

a startup screen (firmware version) and then

goes straight to the primary display area (see

image to the right). The "Favorites" menu

item holds your 10 favorite sounds. Below

"Favorites" are your various sound categories.

The bottom line of the display is a status bar

that shows (in order): current volume level,

mute status, battery level, and elapsed timer.

You navigate through the screen with the

"Scroll Up" and "Scroll Down" buttons. As you

scroll, the black highlight bar moves up and

down, respectively. To select a menu item, push the "Select" button. To move back to the previous screen

after making a selection, use the "Back/Menu" button.

The main menu provides access to a variety of transmitter configurations. To access the main menu, push

the "Back/Menu" button a single time. The available menu options are as follows: "Sound Settings,"

"Display/Power," "Timer/User," and "Remote Settings." The following sections cover each of these menu

items and their sub-menu items in detail.

The TX433 has a range of volume steps from 0 – 20. Increasing the volume in the field by increments of 1

may be too slow for some, therefore, this stepping value is configurable. You can choose from 1, 2, and 3.

To change the volume step value, highlight the "Volume Step" menu item, push the "Select" button, then

use the "Sound Up" or "Sound Down" scroll buttons to cycle through the options. When the desired option

is set, push "Select" a final time to lock it in. The value assigned to the Volume Step option will be

remembered between power cycles.

This menu allows you to specify which mode of sound playback the Patriot operates on. The available

options are: repeat, single play, and jukebox. The default setting is repeat. In Repeat mode, the Patriot will

play the selected sound repeatedly until you interrupt it. In Single play mode the sound will play a single

time, then stop. In Jukebox mode the sounds play a single time, incrementally. The Play Mode setting is

NOT stored between power cycles. You will need to change this setting each time you power on the Patriot

remote.

During normal operation, if the Patriot is muted and you request to play a favorite, the sound is queued for

playback, but it cannot be heard until the caller is un-muted. Favorite mute override will take care of this

and eliminate the need for un-muting the sound upon preset activation. It works by initially checking to see

if mute is active and, if it is, un-mute the Patriot prior to initiating playback of the sound. Turning on favorite

mute override can be done by accessing Sound Settings, highlighting the "Fav Mute OR" menu item,

pushing "Select", then using the "Sound Up" or "Sound Down" to toggle between off and on. Push "Select"

a final time to set it. This setting is remembered between power cycles.