DSE RE-TCC5EU Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera DSE RE-TCC5EU herunter. DSE RE-TCC5EU 3 Seiten. Color analog camera

Seite drucken

OWNER'S MANUAL

Product description

RE-TCC5EU it is a high-performance analog CCTV camera for applications requiring the highest

video quality. E 'based on Sony Super HAD CCD, capable of combining high-resolution color with

great night vision capability and wide dynamic range.

Main features

SONY Super HAD CCD Wide Dynamic Range 1/3 '' high resolution 700 TVL

WIDE DYNAMIC RANGE - The WDR feature allows the camera a better yield in locations

containing different levels of illumination.

Minimum illumination 0.0005 Lux. Not compatible with IR illumination

vertical and horizontal Mirror function for

tilting the image in the backward or shooting with camera upside

OSD (On Screen Display), via programming screen MENU controllable with rear buttons.

Titler for

Stamping number

camera

Connections

Video

BNC connector for video output

(Terminal)

12VDC Power supply

RS485

(Terminal)

RS 485 port (not used)

IRIS

Connector for auto-iris lenses

Power LED

OSD

Buttons for control of OSD

VIDEO BNC video output - Top left you connect a cable leading to the monitor or DVR,

typically via coaxial cable RG59 BNC connector.

IRIS input for auto iris lens - The camera is able to control auto iris lenses.

Connect 12VDC power supply by at least 1A

STABILIZED such as RE-AL4S model. The terminal has two classics of the + and -. And 'it

provided a

RE-TCC5EU Color Analog camera

adapter cable with

feed 5.5 mm.

5 OSD- control buttons With the central button enters the camera setup menu, with the

other buttons you move between the menu items

RS-485 - Not used on this model.

fixing

The camera is provided without bracket which must be purchased separately. The thread for the

bracket is available under the camera both above for ceiling mounting

Power to the camera

On the back of the camera there is a connector for the power supply

12VDC power supply by at least 1A with 5.5 plug

mm. center-positive, as the model RE-AL4S . Attention to use STABILIZED feeders that provide

12V in any load condition. The use of a different supply voltage from 12VDC can generate video

disorders and in the worst cases damage the camera.

If implemented centralized supply pay attention to the power cables are too long, which could

introduce excessive voltage drop.

Connect the video

the

The video output is on the rear of the camera and has a BNC type connector. It must be

connected to the monitor or video management device. If the distance to be covered is a few

meters you can use any type of cable. But if you go over 10 meters we recommend using the

coaxial cable type RG59 or similar which also allows the wiring over a hundred meters. E 'can

also traferire the analog video signal on twisted pair cable using special converters balun

RE-BNCRJ1

Attach the lens

These cameras are supplied without lens so that you can equip with the lens more suited to the

size and to the ambient brightness. The attack to the target is C / CS type. The goal must be

purchased separately and is screwed on the front of the camera. If the lens is of the iris type

must be connected to the connector socket to the rear view camera. The camera is capable of

controlling autoiris Direct Drive goals. If you need to bring their own to the connector solder

these are the PIN to use:

PIN DIRECT

DAMP - 2

DAMP + 3

DRIVE + 4

DRIVE -

Once the lens is screwed, it is necessary to

proceed to the focus adjustment.

Since the camera can accommodate any type

of lens must be adjusted first

focal distance from the CCD acting

threaded connector on the front of the

camera. To do

this is necessary to loosen the retaining screw placed over the

Document: RE-1D4 TCC5EU

Update: April 2014

jack

of the plug

(POWER).

Need

connect a

there

ferrule

Page: 1