DSE DSEG8660 Einbauanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Einbauanleitung für Controller DSE DSEG8660 herunter. DSE DSEG8660 5 Seiten.

Seite drucken
NOTE: Depending upon module configuration, some parameters in the Main and Running Editors may not
be available. For more information refer to DSE publication 057-324 DSE8600 Configuraiton Suite PC Software
Manual available from www.deepseaelectronics.com
MAIN CONFIGURATION EDITOR PARAMETERS
Section
Parameter As Shown On Display
Display
Contrast
Language
Current Date and Time
Alt Config
Default Config
Bus
Start Delay On Load
Battery Under Voltage Warning
Battery Under Voltage Warning Delay
Battery Under Voltage Warning
Battery Over Voltage Warning
Battery Over Voltage Warning Delay
Battery Over Voltage Warning
Load Level For More Sets
Load Level For Less Sets
Ramp Up Rate
Ramp Down Rate
Bus Over Zero Seq Volts
Bus Over Zero Seq Volts
Bus Under Pos Seq Volts
Bus Under Pos Seq Volts
Bus Over Neg Seq Volts
Bus Over Neg Seq Volts
Bus Asymmetry High
Bus Asymmetry High
Enable MSC Compatibility
Mains
Under Voltage Trip
Over Voltage Trip
Under Frequency Trip
Over Frequency Trip
Transient Delay
CT Primary
CT Secondary
Full kW Rating
Full kVar Rating
Mains Over Zero Seq Volt
Mains Over Zero Seq Volt
Mains Under Pos Seq Volt
Mains Under Pos Seq Volt
Mains Over Neg Seq Volt
Mains Over Neg Seq Volt
Mains Asymmetry High
Mains Asymmetry High
Timers
LCD Page Delay
LCD Sleep Timer
Remote Start On Load
Remote Start Off Load
Telemetry Start
Parallel Run Time
Start form AMSC Master
Transfer Time/ Load Delay
Breaker Close Pulse
Breaker Trip Pulse
Bus Close Delay
Values
0%
English, Other.
DD:MM:YY, hh:mm:ss
Default Config / Alternative Config
0 h 0 m 0 s
Active / Inactive
0 h 0 m 0 s
0.0 V
Active / Inactive
0 h 0 m 0 s
0.0 V
0 %
0 %
0.0 %
0.0 %
Active / Inactive
0.0 V
Active / Inactive
0.0 V
Active / Inactive
0.0 V
Active / Inactive
0.0 V
Active / Inactive
0 V
0 V
0 Hz
0 Hz
0.0 s
0 A
Power Cycle After Exit
0 A
Power Cycle After Exit
0 kW
0 kvar
Active / Inactive
0 V
Active / Inactive
0 V
Active / Inactive
0 V
Active / Inactive
0 V
0 h 0 m 1 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
Section
Parameter As Shown On Display
Battery Under Voltage Warning Delay
Battery Over Voltage Warning Delay
Return Delay
Generator Transient Delay
Mains Fail
Mains Transient Delay
Mains Transfer Time
Mains Over Zero Seq Volt Delay
Mains Under Pos Seq Volt Delay
Mains Over Neg Seq Volts Delay
Mains Asymmetry High Delay
Gen Over Zero Seq Volt Delay
Gen Under Pos Seq Volt Delay
Gen Over Neg Seq Volts Delay
Gen Asymmetry High Delay
Schedule
Schedule
Schedule Bank 1 Period
Island / Parallel / Off Load / Auto Start Inhibit,
Week, Start Time, Run Time and Day. Selection
(1 to 8)
Schedule Bank 2 Period
Island / Parallel / Off Load / Auto Start Inhibit,
Week, Start Time, Run Time and Day. Selection
(1 to 8)
Values
0 h 0 m 0 s
0 h 0 m 0 s
0 h 0 m 0 s
0 s
0 s
0 s
0 s
0.0 s
0.0 s
0.0 s
0.0 s
0.0 s
0.0 s
0.0 s
0.0 s
Active / Inactive
Weekly / Monthly,
Press the Tick
button to begin editing
then up or down when selecting the different
parameters.
Weekly / Monthly,
Press the Tick
button to begin editing
then up or down when selecting the different
parameters.