ATS 532A Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Laborausrüstung ATS 532A herunter. ATS 532A 7 Seiten. Contrast resolution phantom

CARE RUBBER-BASED PHANTOMS

For best results the phantom should be kept clean at all times and stored at room

temperature. In particular a build-up of dried coupling gel on the scan surface should be

avoided. The phantom may be cleaned with warm water using a lint free cloth.

Particularly stubborn stains and dirt may be removed with a mild household cleaner. The

use of petroleum solvents should be avoided since they may adversely react with the

rubber-based material.

WARRANTY

Statement of Warranty:

ATS Laboratories, Incorporated warrants this rubber-based phantom for it's lifetime from

the date of delivery to the purchaser, that the Phantom is free from functional defects in

materials and workmanship. The lifetime of this phantom is estimated to be 10 years

from the date of manufacturing. If ATS Laboratories, Incorporated, deems the phantom

to be defective, at its sole option, the Phantom will be repaired or replaced free of

charge, in a reasonable amount of time.

ATS shall not be otherwise liable for any damages, including but not limited to incidental

damages, consequential damages, or special damages.

There are no express or implied warranties which extend beyond the warranties as

stated below.

Conditions of Warranty:

1. The defect must be reported and the Phantom returned within the warranty period.

2. The Phantom must be packaged properly to avoid damage during shipping.

3. All transportation charges will be paid by the purchaser.

Invalidation of Warranty:

1. If the phantom has been altered or repaired other than by ATS Laboratories,

Incorporated.

2. If the phantom has been subject to abuse, misuse, negligence or accident.

3. If the purchaser has exposed the Phantom to petroleum solvents.