3nStar RPT015 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker 3nStar RPT015 herunter. 3nStar RPT015 6 Seiten.

(5) POWER LED (

Power LED on represents printer power on; Power LED off represents printer

power off.

【2】 SELF TEST INSTRUCTIONS:

Make sure the printer is connected with the power and turn it off. Keep Pressing

down the FEED button and simultaneously turn on the power. Release FEED

button when the ERROR and PAPER LED double-blinking in the same time. The

printer will automatically print out self-test paper including its status and

configurations.

【3】 HOW TO ENTER HEXADECIMAL MODE

Make sure the printer is connected with the power. Press the FEED button and

simultaneously turn on the power. Then wait for the ERROR and PAPER LED

double-flashing at the same time, wait for the ERROR LED on and stop pressing

the FEED button. Now the printer enters the hexadecimal mode. Press

FEED button twice, and it will print automatically with "Hexadecimal

Dump"on the first line of the paper showing its hexadecimal mode. Press

FEED button three times will go back to normal mode.

【4】 INITIALIZATION

Make sure the printer is connected with the power outlet. Press the FEED button

and simultaneously turn on the power. After ERROR and PAPER LED

double-blinking at the same time, wait for ERROR LED on until ERROR

and PAPER LED double-flash again. Release the FEED button when

buzzer alarming. At this time the printer has been initialized, restoring

factory settings.

CONNECTING THE CABLES

A. Connect the adopter cable to the printer power interface.

B. Connect the data cable to the printer port.

C. Connect the cash draw to the printer.

Interface supports the

following combinations

USB+ Ethernet

USB+ serial port

USB+ serial port+BT

USB+ serial port+WIFI

)

Power

adaptor

cord