ATS-TN PAVDII Schnellstarthandbuch und Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Schnellstarthandbuch und Handbuch für Telefon-Zubehör ATS-TN PAVDII herunter. ATS-TN PAVDII 13 Seiten. Ats-tn pavdii personal assistance voice dialer ii

Seite drucken
 Press
to enter settings
 Use ▲ and ▼ to change digit
 Press
to move to next digit
 Repeat this sequence until all digits are set. Leave un-
used digits as "-"
 Press PB/D to leave menu
5.6 SET DIAL MODE – PULSE OR TONE (DTMF)
The telephone can dial in Tone (DTMF) or Pulse mode. By
default the telephone is set to Tone (DTMF) mode.
 Press PRO
 Press ▼ 3 x to select "SET DIAL MODE"
 Press
to enter settings
 Use ▲ and ▼ to select "PULSE" or "TONE"
 Press
to confirm
 Press PB/D to leave menu

5.7 SET FLASH TIME

Flash is used for services like "call waiting" (if service is
provided by telephone company) or to transfer calls when
connected to PBX system.
Depending on the country, flash time can vary. The telephone
supports (3) possibilities: 100, 300, 600 msec
 Press PRO
 Press ▼ 4 x to select "SET FLASH TIME"
 Press
to enter settings
 Use ▲ and ▼ to select desired flash time
 Press
to confirm
 Press PB/D to leave menu
Page 12
5.8 STORE TELEPHONE / PHONEBOOK NUMBERS
You can store up to 30 phone numbers / names in the
telephone. As few as 1 or all 30 numbers can be set as
emergency numbers. NOTE: If storing 911 in emergency
contact list, store as the last emergency contact.
 Press PRO
 Press ▲ 2 x to select "STORE NUMBER"
 Press
to enter
 Enter telephone number to be stored
NOTE: To store a pause while programming, press RD/P
To store a * or # while programming, press those keys
 Press DEL to delete a wrong entered number
 Use ▲ and ▼ to move back and forward through number
 Press
to confirm
 Enter name using characters on numeric keypad
 Press DEL to delete a wrong entered character
 Use ▲ and ▼ to move back and forward through entered
characters
 Press
to confirm
 Select "EMERGENCY OFF" or "EMERGENCY ON"
In case of "EMERGENCY ON" you need to select position of
this number (specifies in what order it will be dialed)
Use ▲ and ▼ to select position
-
-
Press
to confirm
In case you want to overwrite an existing position, you will
have to confirm "OVERWRITE?" by pressing
number is saved, menu will automatically go to "NAME
RECORDING"
 Press and hold
 After the beep, say name of stored contact
 Release
button to finish recording
 Press PB/D to leave menu
The maximum length of the recording is '3' seconds
. When
and wait for a beep
Page 13