ATsens AT-Patch Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Körperpflegeprodukte ATsens AT-Patch herunter. ATsens AT-Patch 14 Seiten.
Auch für ATsens AT-Patch: Kurzanleitung (2 seiten), Kurzanleitung (6 seiten), Benutzerhandbuch (14 seiten)
Seite drucken
How to attach the device
Checking the area to attach the device
1
Draw an imaginary line between the middle of the two clavicles and
left nipple, and check the position to ensure the device is attached
to the center of the area.
Shaving and exfoliating the device attachment area
2
If there is a lot of chest hair in the area where the device will be attached,
use a razor to remove the chest hair and remove foreign substances such
as dead skin cells.
Cleaning the area where the device will be attached with alcohol
3
1) Clean the attachment area with an alcohol swab for at least 1 minute.
2) Clean with alcohol and dry for at least 2 minutes.
4
02
How to use the device
4
5
Power Button
(3 seconds)
6
My ECG
Detaching the Film & Attaching the device
Detach the device from the transparent protective film. And attach
the device with the side marked with "
Up" facing upwards.
▲
Turning on the power
Press the power button of the device for more than 3 seconds and
the color of the button will change to green, flash 3 times, and make
a sound.
Checking the ECG signal
1) After attaching, check the signal status in AT-Note App.
(Reattachment 1~2 times possible if the signal would be poor.)
2) After confirming the signal, press the entire area of the device for
at least 10 seconds so that the device adheres well.
02
How to use the device
5