DSPPA MP-220PII Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken DSPPA MP-220PII herunter. DSPPA MP-220PII 4 Seiten. Classroom broadcast amplifier
Seite drucken
To MP9820S
Switching Power
（selected）
Speakers
Receive 100V
signal from the
control centre
（selected）
Notice：All of the COM is public ground link; the polarity can't be connected by contraries.
OPERATION AND NOTICE
l Connect with the MP9820，the turned off amplifier will be stared up when there is the DC24
switch power. It can accept the priority 100V power which from the system centre and carry
out the mute function. The 100V signal can affect the mute function but not the volume.
l The volume of spare microphone can be adjust by the volume control of Mic.1. Mic.1 has the
priority.
l The turnover cover with elasticity shall be open by the key. 1~2 microphone can be put inside.
l The total load power should be less than the rated power.
l All of the wire should be in good condition.
l Against the wed, unventilated, heat.
HANGING
1. Stick two nails on the wall.( the
position and the distance refer to
the two nail hole of the amplifier.
2. Connect the wire line then hang it on.
Guard against
Nail hole
theft hole
3
Mic.1
Mic.2
Aux input 1
Aux input 2
Nail hole 2
Nail hole