DSPPA PC1011PII Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken DSPPA PC1011PII herunter. DSPPA PC1011PII 12 Seiten.
Seite drucken
* Fire-fighting/public addressing system
(B) Rear panel
CAUTION:
CHIME
RISK OF ELECTRIC
VOL
SHOCK.DO NOT OPEN!
DATA IN
DATA OUT
MIN
MAX
警告
请勿打开,以免触电
广州市迪士普音响科技有限公司
Guangzhou DSPPA Audio Co.,Ltd.
1 2
3
1. Remote-control input port
The remote-control input port connected to the previous equipment.
2. Remote-control output port
The remote-control input port connected to the next equipment.
3. Bell tune control knob
To regulate the output volume of the bell tune by turning clockwise to increase the volume,
and turning counterclockwise to decrease the volume.
4. MIC2, 3, 4, and 5 input ports
The microphone 2 to 5 input ports are connected by use of 6.35mm plug.
The microphone port has three non-equilibrium ports and two equilibrium ports.
The plug of the non-equilibrium port is as shown in the right figure.
5. EMC1 and 2 input ports
Such two ports are used to connect the alarm signal and timely bell tune with the priority only second to that
of the MIC1 port. It is recommended to connect the microphone for emergency broadcasting to "MIC1", to
connect the sound source for local calls to "EMC1", and to connect the timely bell tune to "EMC2" by
means of the 6.35mm plug.
6. AUX1, 2 and 3 inputs
Such tree input ports are used to input the peripheral sound source signals, such as CD, cassette deck and
tuner, which are connected by means of the lotus-form plug.
7. Audio output port
Such port is used to connect the amplifier or the tuner equipment, which is connected by means of the
lotus-form plug.
8. 24V DC power input port
It is used as the incoming port of the 24V DC backup power. When connecting, pay attention to the positive
and negative poles.
9. AC power input socket
The AC power cable is inserted into such socket.
10. AUX4 and 5 inputs
As the peripheral sound source input port, it is connected by means of 6.35mm plug.
11. AC 110V/220V selector switch
It is used to select the working voltage.
10
BALANCED
INPUT
INPUT
AUX4
AUX5
MIC2
MIC3
MIC4
MIC5
EMC1
MODEL:
4
5
INPUT
OUTPUT
AUX1
AUX2
AUX3
EMC2
公共广播系统控制器
6
7
Obverse Input
6
Series PC10
11
12
FUSE RATING
~220-230V/50Hz-60Hz
F1AL: ~110-115V
F0.6AL: ~220-230V
~110-115V/50Hz-60Hz
VOLTAGE SELECTOR
~115V-230V/50Hz-60Hz/10W
STATION
STATION
POWER INPUT
POWER OUTPUT
GND.
+24VDC
+24VDC
GND.
8
9
Reverse Input
Ground
（Legend of 6.35mm plug）