DSPPA MP1715T Benutzerhandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für MP3-Spieler DSPPA MP1715T herunter. DSPPA MP1715T 20 Seiten. Mp3 timing player
Seite drucken Make use of the "Page up" and "Page
down" buttons to display the timing
points by page turning;
Make use of the "delete" button to
delete the timing point selected
currently;
Make use of the "delete all" buttons
to delete all the timing points in the
program; therefore, it is required to
use the "delete all" cautiously.
After completing the editing, click the top
right corner to return to the previous
interface.
4.2 Editing of daily program
On the task programming interface, click the
"daily program" button to enter the daily
program editing program as shown in Figure
4.7.
Daily program
button
Figure 4.6 Task Programming
Figure 4.7 Programming of Daily Program
On the interface shown in the above diagram,
select the timing point to be edited and then
click the "setting" button, or click "additional"
button to enter the timing point setting
interface as shown in the following diagram:
Figure 4.8 Programming of Daily Program
It is required to set the start time and end time
for the timing point of the daily program. The
setting mode of the timing power and program
is the same as that of the weekly program.
When setting the start time and end time, first
click the option to be set. For example, in
order to set the digit of "hour" of the end time,
click the display button of such digit, and enter
the target digit on the popped up numeric
keypad, and then click the "OK" button to
complete the setting.
With regard to the setting operations for all the
digits involved in the equipment, all the digits
shall be entered in the same mode.
The operation mode for setting of the timing
power and program is the same as that of the
weekly
program.
description in clause 5) in the previous page.
4.3 Invoking of weekly program
After completing the editing of eight weekly
programs and one daily program, it is allowed
to invoke such program for implementation.
When invoking the program, enter from the
"system
setting"
"broadcasting task programming" interface
(As shown in the diagram at the left side), and
select the serial number of the program to be
invoked below such interface. It is allowed to
select two weekly programs for circulated
implementation by a single operation.
4.4 Description of help
On the "broadcasting task editing" interface,
click the "help" button to pop up the
description of help. The user who cannot
understand the difference between the daily
10
MP3 Timing Player
Please
refer
to
interface
into
the
the