DSPPA CM-61 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Konferenz-System DSPPA CM-61 herunter. DSPPA CM-61 10 Seiten. Digital programmable conference system

Seite drucken

* Fire protection / PA system

System right/left audio output jack (AUDIO OUT). (The jacks are connected to power amplifier)

System audio unbalanced output jack (NO BALANCED OUT). (Connected to power amplifier)

System audio balanced output port (BALANCED OUT). (Connected to the power amplifier, the

output signal is not controlled by control unit tone adjustment.)

System connection port 8P-DINX3 (LONE). (Connected to microphone units)

Interface has not been enabled.

AC220 power outlet (AC).

Operation Instructions of MP9866

3.1

System Connection

CM60

CM61

3.2

Function Mode Setup

Connect the system as per the connection diagram and press the power switch to turn on the power. Select the

operation mode of the system according to the requirements of conference. For control unit setup, there are three

kinds of principal mode: Fully Free mode (Free), First-In-First-Out mode (Fifo) and, Limit mode (Limit). Only

one of the three modes can be selected. If the mode indicator is lit, it means that mode is active. Each principal

mode can include the following three kinds of subsidiary modes: Chairman Only mode, Auto Power Off and

Chairman Priority Music prompt. (These three kinds of subsidiary modes may coexist with the principal mode

entirely or separately.)

AMP

CM61

Digital Programming Conference System

AC 220V

CM61