DSR DSR5221 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Batterieladegerät DSR DSR5221 herunter. DSR DSR5221 12 Seiten. Pro series
Seite druckenIMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL.
SAVE THESE INSTRUCTIONS – Charge the booster's internal battery immediately after purchase, after every
use and every 30 days. It is highly recommended to leave the booster on permanent charge when not in use. This
manual will show you how to use your booster safely and effectively. Please read, understand and follow these
instructions and precautions carefully, as this manual contains important safety and operating instructions.
The signal word indicates the level of the hazard in a situation.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury
DANGER
to the operator or bystanders.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury
WARNING
to the operator or bystanders.
Indicates a potentially hazardous situation which, if not avoided, could result in moderate or minor
CAUTION
injury to the operator or bystanders.
Indicates a potentially hazardous situation which, if not avoided, could result in damage to the
IMPORTANT
equipment, vehicle or property.
DS BOOSTERS CONTAIN SEALED, NON-SPILLABLE LEAD-ACID BATTERY.
MUST BE DISPOSED OF PROPERLY.
WARNING: Possible explosion hazard. Contact with battery acid may cause
severe burns and blindness. Keep out of reach of children.
Markings and symbols
Contact the equipment
supplier for details on how to
properly dispose
of this product within a
specific country, per WEEE
requirements.
12V 2A
Charging
Port – see
section 6.7.1
Read manual
before using.
For indoor
use only.
Use in a
well-ventilated
sparks and flame – battery
area.
could emit explosive gases.
Do not
Caution, risk of
expose
electric shock.
to rain.
Class II
Charger
Keep away from
• 2 •
Fuse –
see Section
8 for fuse
replacement
instructions.
Warning
If auto engine does not start,
stop and wait for at least
3 minutes, then go back
to step 4 – see Section 7.1.4.