Attero Tech Dante unD6IO-BT Benutzerhandbuch - Seite 17
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör Attero Tech Dante unD6IO-BT herunter. Attero Tech Dante unD6IO-BT 19 Seiten. Bluetooth multi-i/o wall plate
Seite drucken
5.2 – Software Configuration and Control
The unD6IO-BT is fully supported in unIFY Control Panel v3.2 and newer software. For a full description of the software
and configuration features refer to the integrated help documentation within the unIFY Control Panel application.
rd
5.3 – 3
Party Control
The unD6IO-BT supports 3
rd
pairing and AVRCP commands.
5.3.1– API Documentation
Information on the commands the unD6IO-BT supports as well as details of how to use the 3
found in the unIFY 3
rd
party Software API document, available from the registered users section of the Attero Tech website
(Go to
www.atterotech.com
5.3.2 – Control Interface Type
There are two control interface types available. The first type is a Dante™ proprietary interface (-C) which is typically used
by devices already that have built-in support for Attero Tech devices. The second type supports a 3
(-U) and is available to anyone to use with any device capable of sending and receiving UDP messages.
The type of command interface a specific device supports is defined by the Dante™ firmware it has been loaded with.
There are two methods to determine which Dante™ firmware and thus which command interface that is:
1)
unIFY Control Panel V2.0 or later: Right-clicking on the device in the device list, mouse over the "Device Info"
option and then look for the "Control Type" option. A "-C" means the device is using the Dante™ Proprietary
interface. A "-U" means the device is using the Direct UDP interface.
2)
Dante™ Controller": Double-click on the device in question in the routing grid to display the "Device View" form,
select the "Status" tab and look for the "Product Version" and "Firmware Version" parameters in the "Device
Information" section.
The product's control interface is specified when ordering the unit. However, it can be easily changed though once the
unit is in the field by updating the device's Dante™ firmware. Firmware updates can be done using the smart firmware
update option within our unIFY Control Panel application (V2.3 and later). Both unIFY and .SFU file for updating a device
can be obtained from the customer portal section of the Attero Tech website (Go to
"Sign-in" option).
5.3.3 – Using the Command interface
In order to make use of the control interface, regardless of type, the unD6IO-BT and the controlling device need to be on
the same physical subnet and need to have IP addresses in the same range. The control devices should then be able to
converse with the unD6IO-BT without any further configuration necessary.
© Attero Tech LLC 2018
party control allowing external system to manage the unD6IO-BT's settings such as remote
and click on the log-in option).
Product
Firmware
Version
Version
V4.x.x
V1.0.0
V4.x.x
V2.0.0
Control Interface
Dante™ Proprietary (-C)
Direct UDP (-U)
Page 16
unD6IO-BT
User Manual
rd
party UDP interface can be
rd
party UDP interface
www.atterotech.com
and click on the
614-00033 Rev 01_c