Attero Tech CommandHub Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Netzwerk-Hardware Attero Tech CommandHub herunter. Attero Tech CommandHub 20 Seiten. Unify proxy device for control and routing

Seite drucken
4.2.4 – Get Assigned Dante Channel List
This command will retrieve a list of channel assignments to a specified Dante device.
Start
Character
0x02
Start
Command
Character
(4 ASCII)
0x02
RADC
*Note: Spaces in the examples are for clarity only.
Example command:
<START> GADC unDX2IO-010203 <CR> <STOP>
Example response:
<START> RADC unDX2IO-010203 <CR> 0002 In1@unD3IO-010203 <CR> In2@unD3IO-010203 <CR> <STOP>
*Note: Channel assignments are reflected as assignments to a device's receive channel, similar to the "Connected To"
status shown in Dante Controller.
Example error response: [device not present]
<START> RADC unDX2IO-010203 <CR> 0001 [NA] Device Not Present <CR> <STOP>
© Attero Tech LLC 2015
Command
(ASCII)
GADC
Table 7 - GADC Command Format
Device
Number of
Name
Devices
(ASCII) +
(4 ASCII
<CR>
characters
pre-pended
with '0')
"Device
0002
Name"
Table 8 - GADC Response Format
Device Name
(ASCII) + <CR>
"Device Name"
Assignment Name 1
(ASCII) + <CR>
"IN1@unDIO2X2-
010203"
Page 12
CommandHub
User Manual
Stop
Character
0x03 0x07 0x04
...
Assignment
Name 'n'
(ASCII) + <CR>
"IN2@unDIO2X2-
...
010203"
614-00019-01
Stop
Character
0x03 0x07
0x04