DT Research 504T Grundlegendes Betriebshandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Grundlegendes Betriebshandbuch für Tablette DT Research 504T herunter. DT Research 504T 4 Seiten. Medical-grade integrated lcd system
Auch für DT Research 504T: Betriebshandbuch (4 seiten), Grundlegendes Betriebshandbuch (2 seiten)
Seite drucken
I/O Ports
The Integrated LCD System has a comprehensive set of I/O ports located at the bottom side
of the unit.
502T
Front
Botton
A
B
L
C
Power button
A
G
B
Programmable buttons
H
Speakers
C
I
DC-in
D
J
HDMI output
E
K
USB 3.0 ports
F
L
PRECAUTIONS
•
Always exercise care when operating and handling the Integrated LCD System.
•
Never disassemble any portion of the enclosure, as this will void any product warranty on
the Integrated LCD System.
•
Do not use any AC/DC adapter other than the one provided with the device or a replacement
acquired from the manufacturer.
•
In the unlikely event that smoke, abnormal noise or strange odor is present, immediately
power down the Integrated LCD System and disconnect all power sources. Please report
the problem to your device provider immediately.
2
Back
K D
E
F
G
H
I
J C
Ethernet ports (RJ45)
Audio jack
USB 2.0 ports
COM ports
Potential equalization
conductor (optional)
SD Card Reader
BASIC FEATURES
The Integrated LCD System integrates a high-brightness 21.5", 23.8", or 27" display with a high-
performance system and USB ports to satisfy the varying needs for comprehensive point-of-
care applications.
Attach The Tabletop Stand (Optional)
J
1.
Insert the top two tabs of the tabletop stand into the top two open slots on the 502T/504T/507T
back panel.
2.
Push the latch to pivot the two lower tabs of the tabletop stand.
3.
Push the two lower tabs into the two lower slots on the 502T/504T/507T back panel. Make
sure the latch locks back into position so the stand is securely attached.
Detach the Tabletop Stand (Optional)
• Push the latch to pivot the two lower tabs.
• Pull out the two lower tabs, then the two upper tabs from the 502T/504T/507T back panel.
Powering ON and OFF
Please use the AC-DC adapter with the Integrated LCD System for the power supply. To activate
the Integrated LCD System, push and quickly release the Power Button and the display will come
on in a few seconds. To put in Standby mode, push and quickly release the Power Button. To turn
off for extended storage, power off the device safely using any software function that "shuts
down computer" provided in the software operating system.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the device in
"Standby" mode while not in use. Pushing briefly on the same button will wake up the
system within seconds.
NOTE:
Avoid using the Power Button ("hold 4+ seconds" feature) to turn off the device — this form
of hardware shutdown is intended to be a means of recovery from device lockups, and not as
normal operation.
3