DT Research DT302P Grundlegendes Betriebshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Grundlegendes Betriebshandbuch für Tablette DT Research DT302P herunter. DT Research DT302P 4 Seiten.

Seite drucken

OPERATION

Powering ON and OFF

To activate the DT302P, push and quickly release the Power Button. The display will

come on in a few seconds. To put the DT302P in Standby mode, push and quickly

release the Power Button. To turn the DT302P off for extended storage, power off

safely using any software function that "shuts down computer" provided in the

software operating system.

NOTE:

The battery pack shipped with your tablet may be low in power—please use the

AC-DC adapter with the DT302P when setting up for the first time to fully charge

the battery pack, or use the optional battery charger kit.

NOTE:

When the battery pack is charging, the blue-colored Battery LED should blink

slowly. If plugging in the AC-DC adapter does not trigger this blinking activity

and the LED stays dark, the battery pack(s) may have been drained substantially.

Try unplugging/replugging the AC-DC adapter to the DT302P a few times to

activate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the

tablet in "Standby" mode while not in use. Pushing briefly on the same button

will wake up the system within seconds.

NOTE:

For DT302P, avoid using the Power Button ("hold 4+ seconds" feature) to turn

off the tablet—this form of hardware shutdown is intended to be a means of

recovery from lockups, and not as normal operation.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless

LAN connection may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The DT302P may be configured using the utilities and methods dictated by the

software operating system. The DT302P should be configurable for various properties

such as user profiles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT302P is often delivered with an embedded (user-inaccessible) 802.11ax WLAN

adapter equipped with a hidden custom antenna.

•

Through the support of typical WLAN adapters, the DT302P should be able to

detect all 802.11 access points in the vicinity for you to select the access point of

your choice for connection.

•

The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT302P and the

access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for

secure access.

•

When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly configure

associated settings such as Authentication mode, etc.

•

Refer to the access point operating manuals for setting up the 802.11 access

points.