DT Research DT311Y Grundlegendes Betriebshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Grundlegendes Betriebshandbuch für Tablette DT Research DT311Y herunter. DT Research DT311Y 4 Seiten. Rugged tablet
Auch für DT Research DT311Y: Grundlegendes Betriebshandbuch (4 seiten), Grundlegendes Betriebshandbuch (4 seiten), Grundlegendes Betriebshandbuch (10 seiten)
Seite drucken
OPERATION
Powering ON and OFF
To activate the DT311Y, push and quickly release the Power Button. The display will
come on in a few seconds. To put the DT311Y in Standby mode, push and quickly
release the Power Button. To turn the DT311Y off for extended storage, power off
safely using any software function that "shuts down computer" provided in the
software operating system.
NOTE:
The battery pack shipped with your tablet may be low in power—please use the
AC-DC adapter with the DT311Y when setting up for the first time to fully charge
the battery pack, or use the optional battery charger kit.
NOTE:
When the battery pack is charging, the blue-colored Battery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking activity
and the LED stays dark, the battery pack(s) may have been drained substantially.
Try unplugging/ replugging the AC-DC adapter to the DT311Y a few times to
activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in "Standby" mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
For DT311Y, avoid using the Power Button ("hold 4+ seconds" feature) to turn
off the tablet—this form of hardware shutdown is intended to be a means of
recovery from lockups, and not as normal operation.
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed after a launch sequence of several seconds. The wireless
LAN connection may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT311Y may be configured using the utilities and methods dictated by the
software operating system. The DT311Y should be configurable for various properties
such as user profiles, network features, and several system elements.
4
Wireless Networking
Wireless LAN
The DT311Y is often delivered with an embedded (user-inaccessible) 802.11ac WLAN
adapter equipped with a hidden custom antenna.
•
Through the support of typical WLAN adapters, the DT311Y should be able to
detect all 802.11 access points in the vicinity for you to select the access point of
your choice for connection.
•
The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT311Y and the
access points have to match. The SSID is case-sensitive and it is recommended
that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for
secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly configure
associated settings such as Authentication mode, etc.
•
Refer to the access point operating manuals for setting up the 802.11 access
points.
USING THE TABLET
To Hold the Tablet
Left hand: grip the left back side of the tablet with your
left hand four index fingers, with thumb resting on the
top of the back side of the tablet and palm securely
against the back.
Right hand: grip the right back side of the tablet with
your right hand four index fingers, with thumb resting
on the top of the back side of the tablet and palm
securely against the back.
Peripherals Support
Through its USB ports, the DT311Y supports a wide range of USB-based peripherals.
These peripherals are applicable for software installation, applications storage, data
storage, and system software recovery and updates.
If the DT311Y comes with a Mobile broadband module, please contact your product
and/or service provider for the SIM Card installation procedures.
5